Panamax MAX 5100-PM Specification Sheet

LOOKING FOR CRYSTAL CLEAR PICTURE AND SOUND?
• Clean Power Level 3
Improves picture and sound quality by elimi-
nating noise across the entire AC bandwidth.
60% more efficient at eliminating noise than
single stage linear filtration (Level 2).
• 3 Isolated Outlet Banks
Isolating outlet banks from one another
prevents noise contamination between
components.
• High Current Outlets
2 outlets for equipment with high power
demands (Amps/Subwoofers).
• USB Charger
Convenience charger for mp3 players, cell
phones, and other small electronics.
• Gaming LAN Port
Easy access to LAN port on front panel.
Perfect for online gaming.
• Digital Volt Meter
Monitor the voltage supplying your home
theater equipment.
• 12 Volt Trigger
Allows source equipment to activate or
deactivate the outlets on the M5100-PM.
• Power Sequencing
Guards against blown fuses and potentially
damaging speaker thump by automatically
powering outlets on and off in sequence.
• 11 Outlets
5 Always On, 4 Switched, 2 Switched High
Current.
• AVM (Automatic Voltage Monitoring)
Protects equipment against prolonged over/
under voltages by disconnecting the power
and reconnecting it when safe power returns.
MAX 5100-PM
®
HOME THEATER POWER MANAGEMENT
1
Improves Picture and Sound Quality
Level 3 Power Cleaning and Linear Filtration
eliminates common symptoms of contaminated power
(including loss of detail, pops, hisses, hums and visual
artifacts) and allows your A/V equipment to perform up
to its full capability..
2
Monitors Incoming Line Voltage and Provides a
Visual Indication of Power Level
Panamax's patent pending AVM™ circuitry continuously
monitors the incoming power as displayed on the digital
voltmeter. In case of an undervoltage or an overvoltage,
a flashing lightning bolt will be displayed in red in the
voltmeter, and power to the connected equipment is
automatically turned off if either of these conditions is
detected. When voltage returns to a safe level, power to
the equipment is automatically reconnected.
3
Reduces Cross-Contamination Between Components
The M5100-PM is designed to provide noise isolation
between 3 isolated outlet banks including 2 high current
outlets so that any noise created by an A/V component
can not contaminate the power going to equipment
plugged into another outlet bank.
www.panamax.com