Page 2
LOCATION OF CONTROLS CASSETTE REWIND KEY PLAY KEY RECORD KEY CD DOOR REMOTE SENSOR FUNCTION SELECTOR MULTI FUNCTION DISPLAY FM MODE / BEAT CUT SELECTOR 10.) STANDBY / ON INDICATOR 11.) POWER BUTTON 12.) SKIP / TUNING DOWN BUTTON 13.) PLAY/PAUSE 14.) POWER (STANDBY) BUTTON...
LISTENING TO RADIO Manual Tuning Set Function Selector to "Tuner" position. Set Band button to the desired band. Press Manual Tuning "UP" button or Manual Tuning "DOWN" button until your desired station is reached. Adjust the volume control to the appropriate level as desired. Auto Tuning Follow steps 1, 2 of "Manual Tuning".
Page 4
REPEAT INDICATOR General Operation PLAY / PAUSE Button Press once to start play, press once again to stop the temporarily. When CD player is paused, display is blinking. Press to stop play. STOP Button SKIP Buttons Press once to skip to next track Press once, the display will show a "Random".
You can repeat all programmed tracks endlessly by this function. Follow stop 1 to step 5 in Program Play. Press M-UP / REPEAT button. To cancel Repeat Play, press the M-UP / REPEAT button again. Repeat Play (For CD only) by Remote Single Track Repeat Play (only available for normal playing) You can repeat a particular track of the disc endlessly by this function.
RECORDING A. Recording From Radio Set in Tuner mode. Tune in your station and put in your cassette tape. Press Record Key and the Play Key of deck at the same time to start recording. Press STOP / EJECT Key when finished. NOTE: If beat noise is present when recording.
SPECIFICATIONS GENERAL 240V/50Hz Power Supply: 30 Watt Power Consumption: 2 x 5W Output Power (RMS): Speaker 4.0 OHMS, Phones 32 OHMS Terminal Impedance: 188(L) x 230(W) x 279(H) mm Unit Dimensions: 7 kgs Unit Weight: CASSETTE SECTION 4.75 cm/sec Tape Speed: AC BIAS Recording System: DC MAGNET...