Advertisement
Table of Contents
Plena Power Amplifier | Installation and User Instructions | Operation
5
Operation
5. 1
Switch on and off
5.1.1
Switch on
Caution
Potential equipment damage. Before applying
power, always check the mains voltage selector
at the rear of the unit.
1 Make sure the mains voltage selector (115/230 VAC)
is correctly set for the country's main voltage (see
figure 5.1).
2 Set the power button (1) on the front of the unit to
On - pushed in.
Bosch Security Systems | 2008-02 | PLE-1P120-US, PLE-1P240-US en
5.1.2
Switch off
Set the power button (1) on the front of the unit to Off -
popped out.
figure 5. 1 : Voltage selector
en | 19
Advertisement
Table of Contents
