Download Table of Contents Print this page

Input - Bosch PLE-1P120-US Installation And User Instructions Manual

Plena easy line power amplifier
Hide thumbs Also See for PLE-1P120-US:
Table of Contents


Plena Power Amplifier | Installation and User Instructions | Connections and settings
en | 16
70 V input
The 70 V input is used to connect directly to a 70 V line
(slave operation).
A 70 V input signal can be connected to the Euro style
pluggable screw terminal connector (2) at the rear of the
unit as shown in figure 4.2.
To adjust the volume of the input signal, turn the input
volume control (3) at the rear of the unit.
figure 4.2: Connecting a 70 Volt input signal
Bosch Security Systems | 2008-02 | PLE-1P120-US, PLE-1P240-US en


Table of Contents

This manual is also suitable for:


Table of Contents