Hose; Aippowered Hand Tool; Headlight - Hoover uh70608 Owner's Manual

HOSE:How
to Clean
I 1
To reduce the risk of personal injurt - Unplug before cleaning or servicing.
4.16 To remove hose for tool use, press the hose release button (A) and pull
hose end out.
Clear away debris or obstructions from hose. Do not use sharp objects to clean
out hose as they can cause damage. To lock back into place, push hose into
hose tube until you hear a click.
AIR-POWEREDHANDTOOL:
Howto Clean
Tool varies per model)
CAUTION
To reduce the risk of inju_i from moving parts -
Unplug before servicing.
4.17 Turn tool so bottom faces up. Rotate the
Iatches (A) on either side of tool.
4.18 Remove bottom plate (B).
4.19 Remove any debris and/or hair from brushrolL
Replace bottom plate by aligning tabs along front
edge of tool. Rotate Iatches back into locked position.
HEADLIGHT:
H owto Replace
(available on select models only)
A WARNING A
To reduce the risk of electric shock - Unplug
before cleaning or servicing.
RemovingLens
Press Handle Release Pedal and place handle in
tow position.
4.20 Using a Phillips screwdriver, remove (2) screws
as shown and lift off lens.
Installing Bulb
4.21 Pull old bulb straight out of socket. Push new
bulb straight into socket until locked in place.
Do not use excessive force when installing bulb.
Do not twist or turn bulb when installing bulb.
ReplacingLens
4.22 Reposition lens and secure with screws.
13