Unit Diagram; Operating The Cleaner - Kärcher puzzi 100 Instructions Manual

Unit diagram

1 Housing
2 Carrying handle
3 Fresh-water tank with suction strainer
4 Dirty-water reservoir, removable
5 Cover *
6 Spraying: switch on and off
7 Vacuuming: switch on and off
8 Spray and suction hose complete
9 Power plug with cable
10 Floor nozzle for cleaning carpets – working
width 230 mm
11 Hand nozzle for cleaning upholstery – working
width 110 mm ( optional accessory )
* not shown
Optional accessories
We offer various optional accessories for
a wider variety of applications.
See them in our catalogue or ask at your
nearest Kärcher retail outlet.
Important information
!
This appliance is intended for commercial
use
For your safety
Take note also of all instructions enclosed with
the detergents used.
The recommended detergents may not be used
undiluted. The products are safe to use
because they contain no acids, alkalis or
substances harmful to the environment. We
advise you to store the detergents so that they
are inaccessible to children, to bathe the eyes
thoroughly with water should the detergents
come into contact with them and to consult
a doctor should they be swallowed.
Legal regulations should be observed for
disposal of dirty water and detergent solution.
For the sake of the environment
When you unpack the unit do not simply throw
packaging out with the household rubbish.
Hand over the different parts of the packaging
to the appropriate collection points for
recycling.
4
English
Warranty
The applicable warranty conditions in different
countries are issued by the respective national
distributor of our products. During the warranty
period, any malfunctions of the cleaner caused
by a material or manufacturing defect will be
repaired free of charge.
In the event of a warranty claim, please take
the cleaner, with the accessories and proof of
purchase, to your original dealer or to the
nearest authorised customer service centre.

Operating the cleaner

Using the cleaner correctly
This cleaner is intended for use as follows:
– as a wet cleaner for carpets and carpeting
– in accordance with the explanatory details
and safety information contained in these
operating instructions
Using the cleaner in any other way is
considered to be contrary to its intended
purpose. The manufacturer will not be liable for
any damages that occur as a result of improper
usage. In such cases liability rests solely with
the user.
Putting into operation for the first time
n Put the suction hose of the spray-suction
hose on to the connector on the unit (Fig.
1a). Press the coupling of the spray hose on
to the connector. Make sure they engage
properly (Fig. 1b).
n Place the spray-suction hose firmly on the
grip section (Fig. 2a) and place the coupling
of the spray hose on the connector of the
grip section. Make sure they engage
properly
(Fig. 2b).
n Put on the suction tube and floor nozzle and
make the connection secure by turning the
union nut by hand in an anti-clockwise
direction.
Important note: Make sure that the spray tube lying
inside the tube is properly connected, otherwise this
will lead to a malfunctioning of the unit.
n The hand nozzle for cleaning upholstery
( optional accessory ) is placed directly on the
spray-suction hose.