If These Indications Appear; Setting The Present Time - Tiger JAX-S10U Operating Instructions Manual

Symptom
Nothing happens when a key is Is the power plug properly connected
pressed. to an outlet?
Is the Keep Warm lamp on?
The lid will not close, or it opens Are there any grains of rice adhering
during cooking. to the upper casing, lid gasket, or
around the hook button?
There is a smell of plastic. Such smells may occur when the rice cooker is first used, but they should
go away over time as the rice cooker gets used.
There are stripes or waves on plastic Such stripes and waves are produced when the resin is being molded.
parts. They do not affect the performance of the rice cooker.
Food adheres to the inner lid during When cooking with ingredients that expand during heating, such as eggs
concurrent cooking. and the like, some of that may adhere to the inner lid. If it is bothersome,
reduce the amount of the ingredients.

If these indications appear

Display
"Err" appears on the display and a long- If the rice cooker still does not respond, there is problem with the unit
lasting or continuous beeping alarm itself. Disconnect the power plug and contact TIGER CORPORATION
sounds. U.S.A.
Plastic parts
Plastic parts that come into contact with heat or steam will deteriorate over time. In this case, contact
TIGER CORPORATION U.S.A.
42
Check point Action
Insert the power plug fully into an
outlet.
Press the [KeepWarm/Cancel] key
to turn off the Keep Warm function,
then try the operation again.
Completely remove all remaining
rice.
Action

Setting the present time

Reference
page
16
The present time is displayed in a 24-hour format.
The time cannot be set during cooking, when the Keep Warm function is on, or when the Timer function is in
16
use or during reheating.
„ Example: Changing the present time from "9:30" to "9:35"
15,
32-35 1
Connect each end of the power
–
cord to the specified locations.
–
(1) Connect
24
Reference
page
–
Power plug
2
Display the time setting mode.
Press the [Hour] or [Min] key to display
On
3
Set the present time.
Set the hour with the [Hour] key
and the minute with the [Min] key.
Hold down the corresponding key
to change the time more rapidly.
Appliance plug
4
Once you are finished setting
the time, press the [Menu] key.
The present time is set.
will go out and ":" will blink on the display.
(2) Connect
• To cancel setting the time, press the
[KeepWarm/Cancel] key.
.
Blinks
43 43