Technical Data - Husqvarna 129R Operator's Manual

Engine
Cylinder displacement, cm
Cylinder bore, mm
Stroke, mm
Idle speed, rpm
Recommended max. fast idle speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 7293, kW
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, cm
Weight
Weight without fuel, cutting attachment and guard, kg
Noise emissions (see Note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
Noise levels (see Note 2)
Equivalent sound pressure level at the operator's ear, measured according to
EN/ISO 11806 and ISO 22868, dB(A)
Equipped with grass blade (original)
Equipped with trimmer head (original)
Vibration levels (see Note 3)
Equivalent vibration levels (a
11806 and ISO 22867, m/s2
Equipped with grass blade (original), left/right
Equipped with trimmer head (original), left/right
Note 1: Noise emissions in the environment measured as sound power (L
directive 2000/14/EC. Reported sound power level for the machine has been measured with the original
cutting attachment that gives the highest level. The difference between guaranteed and measured sound
power is that the guaranteed sound power also includes dispersion in the measurement result and the
variations between different machines of the same model according to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statistical
dispersion (standard deviation) of 1 dB(A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard deviation)
2
of 1 m/s .
Model 129R (M10 LH arbor shaft thread) - center hole in blades/cutters, Ø 25,4 mm
Approved accessories
Grass blade/grass cutter
Trimmer head

TECHNICAL DATA

3
3
dB(A)
WA
) at handles, measured according to EN ISO
hv,eq
Type
Grass 255-4 1 inch (Ø 250 4-
teeth)
T25 (Ø 2,4 - 2,7 mm line)
28
35
28,7
2800-3200
11000
8000
0,8
Yes
Yes
NGK BPMR6A
0,6
343
5,21
106
114
94
95
4,21 / 4,23
5,89 / 4,61
) in conformity with EC
WA
Cutting attachment / guard,
part. no.
504001303 / 580446606
537338306 / 580446606