Care and maintenance
Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
Lamp in
refrigerator
compartment
Vegetable
compartment
cover
15
Downloaded from Fridge-Manual.com Manuals
How to dismantle parts
NOTE
Dismantling is done in the reverse sequence of assembly.
•
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
Separate the lamp by pulling it out (➂) while
slightly striking (➀) and rotating (➁) the lamp cover.
Turn the bulb counterclockwise. Max. 40 W bulb
for refrigerator is used and can be purchased at a
service center.
To remove a shelf, lift the left part of the shelf a
bit, push it to the direction , lift the right part to
the diretion , and take it out.
Lift the door rack to
direction holding both
sides and pull it out to
Insert the tool into the marked area ( ) and push
the tool to disconnect.
Use the tool with the flat tip such as (-) screw driver.
Turn the bulb counterclockwise. Max. 40 W bulb
for refrigerator is used and can be purchased at a
service center.
NOTE
Be sure to remove parts from the refrigerator door when removing the vegetable
•
compartment, snack corner and
To remove the vegetable compartment cover, pull
out the vegetable compartment a bit to the front
, lift the front part of the vegetable compartment
cover as shown by , and take it out.
direction.
refreshment center cover
1
2
.
2
1