Husqvarna 343F Operator's Manual page 33

NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
Engine
Cylinder displacement, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
Recommended max. speed, rpm
Speed of output shaft, rpm
Max. engine output, acc. to ISO 8893, kW/ rpm
Catalytic converter muffler
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer/type of carburetor
Fuel tank capacity, US pint/litre
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg 17,2/7,8
Sound levels
(see note 1)
Equivalent sound pressure level at the user's ear,
measured according to ANSI B175.3-1997, dB(A), min/
max:
Vibration levels
Vibration levels at handles, measured according to ANSI
2
B175.3-1997, m/s
At idle, left/right handles, min.:
At idle, left/right handles, max.:
At max. speed, left/right handles, min.:
At max. speed, left/right handles, max.:
Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! Noise pressure at the user's ear and vibration on the handles are measured with all the machine's approved cutting
equipment fitted. The table indicates the highest and lowest values.
TECHNICAL DATA
345FX
3
2,62/43
1,61/41
1,26/32
2800
13500
10500
2,1/9600
Yes
SEM AM
Champion RCJ 6Y
0,02/0,5
Zama C1Q
1,9/0,9
98/104
3,6/4,0
4,0/4,5
1,0/1,1
1,4/1,7
345FXT
2,62/43
1,61/41
1,26/32
2800
13500
10500
2,1/9600
Yes
SEM AM
Champion RCJ 6Y
0,02/0,5
Zama C1Q
1,9/0,9
17,4/7,9
98/104
3,6/4,0
4,0/4,5
1,0/1,1
1,4/1,7
– 33
English