Table of Contents
Advertisement
Available languages
Available languages
When the car without ACC position
Red
Red
Yellow
Yellow
After matching the connections and switching
power supply leads correctly, connect the unit to
the car’s power supply. If you have any questions
and problems connecting your unit that are not
covered in this manual, consult the car dealer.
Using the wired remote control
1
To enable the wired remote control, set
[STR CONTROL] in [SET STEERING] to
[PRESET] (page 10).
Installation
Removing the bracket
Before installing the unit, remove the bracket
from the unit.
1
Insert both release keys until they
click, and pull down the bracket , then
pull up the unit to separate.
Face the hook inwards.
Mounting the unit in the dashboard
When mounting in a Japanese car, see “Mounting
the unit in a Japanese car” (page 21).
Mounting the unit with the supplied
bracket
Before installing, make sure the catches on both
sides of the bracket are bent inwards 3.5 mm
(
5
/
in).
32
1
Position the bracket inside the
dashboard, then bend the claws outward
for a tight fit.
Larger than
1
182 mm (7
/
in)
4
Larger than
111 mm
Catch
(4
3
/
in)
8
Page 20
Hide quick links:
Advertisement
Chapters
Table of Contents
