Air Circulation Mode - NEC RSC1812 Owner's Manual

Airflow Direction (Indoor unit)
The up/down airflow (Vertical Airflow) can be
adjusted by using the remote control.
Press the Start/Stop button to start the unit.
1
Open the door on the remote control. Press
2
the Airflow Direction Start/Stop button and the
louvers will swing up and down. Press the
Airflow Direction Control Button again to set
the vertical louver at the desired airflow
direction.

Air Circulation Mode

Circulates the room air without cooling or heating.
Press the Start/Stop button. the unit will respond with a beep.
1
Open the door on the remote control. Press the Air Circulation button. Close the door on the
2
remote control. Now each time that you press the Indoor Fan Speed Selector, the fan speed
is shifted from low to AUTO and back to low again.
NOTE:
The fan speed of the indoor unit will automatically cycle depending on the room temperature.
AUTO Air economizes power consumption and prevents overcooling. The fan speed is
automatically changed from medium to low or vice versa, depending on the ambient temperature.
Fan speed is on low. Fan speed is on medium. Fan speed is on high.
15
NOTE:
Always use the remote control to adjust the
up/down airflow direction. Manually moving
the vertical airflow direction louver by hand
could damage the air conditioner.
When the unit is shut off, the up/down
airflow direction louver will close the air
outlet vent of the system.
To adjust left/right(Horizontal Airflow) direction
Caution : Ensure unit is turned off before adjusting
the horizontal airflow direction control.
Carefully open vertical louver to allow
access to the horizontal airflow direction.
Adjust the left/right airflow direction by hand.
AUTO
AUTO Air