Soft Dry Operation - NEC RSC1812 Owner's Manual

Soft Dry Operation

Press the Start/Stop button. The unit will respond with a beep.
1
Open the door on the remote control. To select Soft Dry
2
operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is shifted
in the direction of the arrow.
Cooling
Close the door on the remote control.
3
Set the temperature lower than the room temperature. The
temperature can be set within a range of 18°C~30°C in 1°C
increments.
During Soft Dry Operation:
The indoor fan speed is automatically set to low speed and
cannot be adjusted.
11
Soft Dry Auto
(Heat pump model only)
To raise the temperature
To lower the temperature
Heating