Helmet Holding Cable - Yamaha YZF-R6 Owner's Manual

1. Projection
2. Seat holder
2. Remove the key.
TIP
Make sure that the seats are properly
secured before riding.
INSTRUMENT AND CONTROL FUNCTIONS

Helmet holding cable

1. Helmet holding cable
2. Helmet cable holder
3. Middle snap hook
A helmet holding cable is provided in
the owner's tool kit to secure two hel-
mets to the helmet cable holder
equipped on the bottom of the passen-
ger seat.
To secure a helmet with the helmet
holding cable
1. Remove the passenger seat. (See
page 3-20.)
2. Clip the middle snap hook of the
cable onto the cable holder.
3-21
EAU39073 3. Pass one of the other snap hooks
of the cable through the helmet
strap buckle, and then clip the
snap hook onto the cable holder as
shown.
1. Helmet holding cable
2. Helmet
4. Install the
WARNING! Never ride with a
helmet attached to a helmet
holding cable, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA14331]
3
passenger seat.