Instrument And Control Functions; Main Switch/Steering Lock - Yamaha WR250X Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Main switch/steering lock

1
2
3
4
The main switch/steering lock controls
5
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
6
7 ON
All electrical circuits are supplied with
power; the meter lighting, taillight, li-
8
cense plate light and auxiliary light
come on, and the engine can be start-
9
ed. The key cannot be removed.
TIP
The headlight comes on automatically
when the engine is started and stays on
until the key is turned to "OFF", even if
EAU10462 the engine stalls.
OFF
All electrical systems are off. The key
can be removed.
WARNING
Never turn the key to "OFF" or
"LOCK" while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
LOCK
The steering is locked, and all electrical
EAU38531
systems are off. The key can be re-
moved.
To lock the steering
EAU10662
EWA10062
1. Push.
2. Turn.
1. Turn the handlebars all the way to
EAU10685
2. Push the key in from the "OFF" po-
3. Remove the key.
3-1
1 2
the left.
sition, and then turn it to "LOCK"
while still pushing it.