If door must be removed:
Gently lay the unit on its back, on
a rug or blanket.
Remove 2 base screws and base panel.
Remove wire from clips on bottom
of cabinet if required.
4. Unplug connector, if required, by
holding the cabinet connector
in place and pulling the door
Remove bottom hinge screws.
Remove plastic top hinge cover.
Remove screws from top hinge.
Remove top hinge from cabinet.
Remove door and bottom hinge
10. To replace door reverse the above
order, and securely tighten all
screws to prevent hinge slippage.
• Level the unit so the doors close tightly.
• Do not overcrowd the unit or block cold
air vents. Doing so causes the appliance
to run longer and use more energy.
Shelves should not be lined with aluminum
foil, wax paper or paper toweling. Liners
interfere with cold air circulation, making
the appliance less efficient, which could
cause food spoilage.
• Cover foods and wipe containers dry
before placing them in the unit. This cuts
down on moisture build-up inside the unit.
• Organize and label food to reduce door
openings and extended searches. Remove
as many items as needed at one time,
and close the door as soon as possible.
• The appliance should
be located in the
coolest area of the
room, away from
appliances or heating
ducts, and out of