Replacing A Turn Signal Light Bulb; Replacing The Auxiliary Light Bulb - Yamaha TDM900 Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
1 by removing the screw.
2
3
4
5
1. Screw
6
2. Turn signal light lens
2. Remove the defective bulb by
7
pushing it in and turning it counter-
clockwise.
8
9
EAU24202
2
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
1
wise until it stops.
4. Install the lens by installing the
screw.
CAUTION:
Do not overtighten the screw, other-
wise the lens may break.
Replacing the auxiliary light
bulb
1
1. Auxiliary light lens
2. Screw
ECA11190
6-33
1. Remove the auxiliary light lens by
removing the screws.
1
2
2. Remove the defective bulb by pull-
ing it out.
EAU38900