Yamaha TDM900 Owner's Manual page 50

PERIODIC MAINTENANCE AND MINOR REPAIR
1
2
1
3
1. Engine oil drain bolt A
4
NOTE:
Skip steps 4–6 if the oil filter element is
5
not being replaced.
4. Remove the oil filter element cover
6
by removing the bolts.
7
8
9
1
2
3
1. Engine oil drain bolt B
2. Oil filter element cover
3. Bolt
5. Remove and replace the oil filter
element and O-rings.
2
1. Oil filter element
2. O-ring
6. Install the oil filter element cover by
6-9
installing the bolts, then tightening
them to the specified torque.
2
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
NOTE:
Make sure that the O-rings are properly
seated.
7. Install the engine oil drain bolts,
and then tighten them to the spec-
ified torques.
Tightening torques:
Engine oil drain bolt A:
35 Nm (3.5 m·kgf, 25 ft·lbf)
Engine oil drain bolt B:
1
30 Nm (3.0 m·kgf, 21.7 ft·lbf)
8. Add the specified amount of the
recommended engine oil, and then
install and tighten the oil filler cap.