Services Assurance And Troubleshooting Procedures; Procedure 11-1 To Troubleshoot A Virtual Service Using Cpam Maps - Alcatel-Lucent 5620 User Manual

Release 12.0 R7 | December 2014 | 3HE 08833 AAAD TQZZA Edition 01
11 — Services assurance and troubleshooting
11.7

Services assurance and troubleshooting procedures

Procedure 11-1 To troubleshoot a virtual service using CPAM maps

Perform this procedure to highlight a path in a virtual service.
Navigate to a virtual site
1 Open the Services Manager by choosing Manage→Service→Services from the
5620 SAM main menu.
2 Search for a virtualized service and click Properties.
3 Select a virtual site from the service navigation tree and click Properties.
Define a source and target for the map highlight
4 Click Navigate and select IGP View: Highlight to Target. The Find Target form
opens.
By default, the V-Switch for the V-Site is listed as a target for the highlight source.
5 To add more source sites, if required, perform the following steps.
i
ii
6 Click Select. The Select Target form opens.
7 To select a highlight target, perform one of the following steps.
a
b
Display the route highlight on the topology map
8 Click OK in the Find Target form. The IGP Topology Map is displayed with the
specified route highlighted.
See the 5650 CPAM User Guide for more information on the features available
from the IGP Topology Map.
11-6
Click Add. The Select Source Site for Target form opens.
Select a Site and click OK.
Select a service site as a highlight target.
i Select Site (Service Management).
ii Select a site and click OK.
Select a V-Port as a highlight target.
Select Virtual Port (Data Center).
i
ii Select a V-Port and click OK.
Alcatel-Lucent 5620 Service Aware Manager
Nuage Virtualization User Guide
5620 SAM