TomTom LINK 300 Installation Manual page 14

EN
Connecting to GO/PRO and WEBFLEET
Connect your navigation device to your LINK
Connect-
ing to
GO/PRO
and
WEB-
FLEET
300/310 to fully enjoy the benefits of your
WORKsmart solution.
When you first switch on your navigation
device, you are asked to connect it with the
LINK 300/310 installed in your vehicle. You can
do this immediately or at any time later.
1. Make sure that the LINK 300/310 is
connected to power and has a GPRS
connection.
2. Switch on your navigation device.
3. Tap the screen to bring up the Main Menu.
4. Tap WORK.
You are asked to start the activation
process. After you have started the
activation process your navigation device
starts searching for Bluetooth devices.
If your navigation device finds more than
one Bluetooth device, it shows a list of the
available devices. Continue with step 5.
If your navigation device finds only one
LINK 300/310, continue with step 6.
5. Select your LINK 300/310 from the list.
The name starts with LINK followed by the
serial number of your LINK 300/310 or the
license plate number of your vehicle. You
can find the serial number on the outside of
your LINK 300/310.
6. Enter the Activation Code, which you find
in your WEBFLEET contract confirmation.
16