OVERVIEW FRONT VIEW (FIG 1) 1. LCD Display : Toggle between clock, calendar and temperature / humidity displays; enter setting mode : Increase values in setting mode; activate clock signal reception : Decrease values in setting mode; deactivate clock signal reception : Activate backlight RMR500 IM EN R8.indd 2 LCD DISPLAY (FIG 2)
* This product is designed to display the temperature and humidity reading of THGN500 in the outdoor temperature/ humidity area only. BACK VIEW (FIG 3) 3 4 5 1. Wall mount hole 2. Foldable stand 3. °C / °F: Select temperature unit 4.
To search for a sensor: Press and hold at the same time. The remote sensor reception icon will show the following status: ICON DESCRIPTION Main unit is searching for sensor(s). A channel has been found. The sensor cannot be found. The transmission range may vary depending on many factors.
Clock signal reception indicator: STRONG WEAK SIGNAL SIGNAL MANUALLY SET CLOCK To set the clock manually, disable the clock signal reception first. 1. Press and hold 2. Press to change the settings. The settings order is: time zone, 12/24 hr format, hour, minute, year, calendar mode (month –...
RESET Press RESET to return to the default settings. SPECIFICATIONS TYPE DESCRIPTION MAIN UNIT 134 x 27 x 134 mm L x W x H (5.3 x 1.1 x 5.3 in) Weight 300 g (10.58 oz) without battery Signal frequency 433 MHz Temperature range -5°C to 50°C (23°F to 122°F)
The technical specifications for this product and the contents of the user manual are subject to change without notice. ABOUT OREGON SCIENTIFIC Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support...
approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.