Baking Bread - Silvercrest SBB 850 A1 Operating Instructions Manual

Hide thumbs Also See for SBB 850 A1:
Table of Contents

Advertisement

Available languages

Available languages

Note:
NEVER use quantities larger than those specified. Too
much dough could rise out of the baking mould
drop onto the hot heating elements and cause a fire.

Baking bread

Preparation
Pay heed to the safety instructions in this manual.
Place the Bread Baking Machine on a level and
firm surface.
1.
Pull the baking mould
the appliance.
2.
Push the kneading paddles
shafts in the baking mould
are firmly in place.
3.
Place the ingredients for your recipe into the
baking mould
add the liquids, sugar and salt, then the flour,
adding the yeast as the last ingredient.
Note:
Ensure that the yeast does not come into contact
with salt or fluids.
4.
Place the baking mould
Ensure that it engages correctly.
5.
Close the appliance lid
6.
Insert the power plug into the wall socket.
A signal tone sounds and in the display
appears the Programme number and the time-
duration for Programme 1.
7.
Select your programme with the Programme
select button
. Each input is confirmed with
a signal tone.
upwards and out of
onto the drive
. Make sure they
in the specified order. First
back in the appliance.
.
8.
If necessary, select the size of bread you want
to bake with the button
9.
Select the browning level
In the display
you have selected, light, medium or dark.
Here you can also select the setting "Rapid"
to shorten the time period in which the dough
rises.
Note:
A browning level cannot be selected with the
programmes 6, 7 and 11.
The function "Rapid" is only available with
Programmes 1-4.
A bread weight level cannot be selected with the
Programmes 6, 7, 11 and 12.
10. You now have the option of setting the end time
of your programme using the timer function.
You can enter in a maximum time delay of up
to 15 hours.
Note:
This function is not available for Programme 11.
Starting the Programme
Now start the programme with the Start/Stop button
.
Note:
The Programmes 1, 2, 3, 4, 6, 8 and 9 start with
a 10 to 30 minute pre-heat phase (except Rapid,
see Table for Programme Sequences). The knea-
ding paddles
do not move themselves. That is
not an error of the machine.
- 9 -
.
for your bread.
the arrow shows you what

Advertisement

Chapters

Table of Contents
loading

Table of Contents