Washing Clothes Using The Cycle Selector - Samsung WF8604FF(A/C/D/F/G/H/R/S/T/V/W/Z) User Manual

Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Sports Wear,
Baby Care, and Daily Wash cycles. It is only necessary if your clothing is heavily soiled.
7. Use the Cycle selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Sports Wear, Wool, Hand Wash, Baby Care, Daily Wash, Quick
29'. The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WF8604NF-02610A-04_EN.indd 25
washing a load of laundry _25
2011-11-30 13:45:48