Charging With The Usb Cable - Silvercrest SLS 2200 C2 Operating Instructions Manual

Charging with the USB cable

If there is no sunlight available, you can charge the battery of the
device with the USB cable
plug of the charging cable to the device's micro-USB port
Connect the USB plug of the USB cable
computer. The charging progress will be indicated by means of
the charge level LEDs
Charge level LEDs
One LED is flashing
One LED is on, the second LED is flashing
Two LEDs are on, the third LED is flashing
Three LEDs are on, the fourth LED is flashing
All LEDs are on
NOTE
► Some computers deactivate the power supply to the USB
ports when they are switched off. If the solar charger's
battery is not being charged, check to see whether your
computer is turned on.
► Alternatively, you can charge the battery of the solar charger
with an external USB power supply (not supplied).
To do this, use the USB cable
You can purchase a suitable 5 V USB power adapter with
an output of at least 500 mA from most electronics stores.
│ GB │ IE
■ 12
. To do this, connect the micro-USB
.
supplied with the product.
to a USB port on your
Charge level
< 25%
25–49%
50–74%
75–99%
100%
SLS 2200 C2
.