Detaching The Quick Release Stand (For Vesa Wall Mount) - Asus MG24UQ User Manual

2.1 Detaching the Quick Release stand (for VESA
wall mount)
The Quick Release Stand of this monitor is specially designed for VESA
wall mount.
To detach the Quick Release stand
1. Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2. Use a screwdriver to remove the four screws on the arm (Figure 1),
and then detach the arm/stand from the monitor (Figure 2).
• We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
• Hold the stand of the monitor while removing the screws.
Figure 1
2
• The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
• Use only the UL Listed Wall Mount Bracket with minimum weight/load 28.8 kg
(Screw size: M4 x 10 mm).
ASUS LCD Monitor MG24U Series
1
1
Figure 2
2-1