This unit operates with 2 x CR2032 batteries. Insert batteries before first use, matching the polarity as SET CLOCK shown in the battery compartment. Press and hold MODE for 2 seconds. The Clock NOTE shows the batteries are low. Area will blink.
Press ALARM to confirm. ACTIVATE ALARM Press to activate or deactivate the Alarm. shows in the Clock / Alarm Area when the Alarm is activated. WEATHER FORECAST SILENCE ALARM This product forecasts the next 12 to 24 hours of weather When the Alarm time is reached, the alarm will sound for 2 minutes.
TEMPERATURE AND HUMIDITY BACKLIGHT This product can display current, minimum, and Press SNOOZE / LIGHT to activate the backlight. maximum temperatures and humidity percentage information. KEY LOCK SELECT TEMPERATURE UNIT The buttons may be locked to avoid accidental changes. Slide the °C / °F switch into the desired location. The To activate lock, press and hold switch is located inside battery compartment.
Clock display HH:MM:SS if you'd like to contact the Oregon Scientific Customer Hour format 12hr AM/PM Care department directly, please visit: Time zone PA (Pacific), MO www2.oregonscientific.com/service/support...
Address: 19861 SW 95th Place, frequency energy and, if not installed and used in Tualatin, Oregon 97062 USA accordance with the instructions, may cause harmful Telephone No.: 1-800-853-8883 interference to radio communications.However, there is no guarantee that interference will not occur in a Fax No.:...
Page 7
is in conformity with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1)This device may not cause harmful interference. 2)This device must accept any interference received, including interference that may cause undesired operation. CAUTION —...
Need help?
Do you have a question about the EB313HG and is the answer not in the manual?
Questions and answers