Download Print this page

Cleaning The Beard Styler Attachment - Philips 9000 SERIES S91 SERIES Booklet

Hide thumbs

Advertisement

18
English
Cleaning the shaver under the tap
Clean the shaver after every shave for optimal performance.
Caution: Be careful with hot water. Always check if the water is not
too hot, to prevent burning your hands.
Never dry the shaving unit with a towel or tissue, as this may
damage the shaving heads.
1 Switch on the shaver.
2 Rinse the shaving unit under a warm tap (Fig. 22).
3 Switch off the shaver. Pull the shaving head holder off the bottom
part of the shaving unit (Fig. 51).
4 Rinse the hair chamber under the tap (Fig. 52).
5 Rinse the shaving head holder under a warm tap (Fig. 53).
6 Carefully shake off excess water and let the shaving head holder
dry.
7 Attach the shaving head holder to the bottom part of the shaving
unit ('click') (Fig. 54).
Cleaning the click-on attachments
Note: Never dry the trimmer or beard styler attachments with a towel
or tissue, as this may damage the trimming teeth.
Cleaning the trimmer attachment
Clean the trimmer attachment every time you have used it.
1 Switch on the appliance with the trimmer attachment attached.
2 Rinse the attachment under a warm tap (Fig. 55).
3 After cleaning, switch off the appliance.
4 Carefully shake off excess water and let the attachment dry.
Tip: For optimal performance, lubricate the teeth of the attachment
with a drop of sewing machine oil regularly.

Cleaning the beard styler attachment

Clean the beard styler attachment every time you have used it.
1 Pull the comb off the beard styler attachment.
Note: Grab the comb in the centre to pull it off the beard styler
attachment. Do not pull at the sides of the comb (Fig. 30).

Hide quick links:

Advertisement

loading

This manual is also suitable for:

S90 series