Oregon Scientific 91VG Specification Sheet

CHAIN PITCH AND GAUGE
PITCH
3/8"
GAUGE
91VG
KICKBACK – ANSI CLASSIFICATION
91VG saw chain is a low kickback saw
chain. It met the kickback performance
requirements of ANSI B175.1 (USA),
and CSA Z62.3 (Canada) when tested
on a representative sample of chain-
saws. Its safety features significantly
reduce the hazard of kickback while
maintaining high cutting performance.
ALL CUTTING SAW CHAINS CAN
KICKBACK, which may result in severe
personal injury to the saw operator or
bystanders. Operate your saw safely.
Read all warnings in your chainsaw
operator's manual.
RECOMMENDED TYPES OF USE
Occasional Commercial
RECOMMENDED SAW SIZES
91VG is intended for use with electric
saws and smaller gasoline-powered
saws up to 2.5 cu. in. (41cc)
RECOMMENDED BAR LENGTHS
10 in. to 18 in. (25 to 46 cm)
KICKBACK-REDUCING FEATURES
•
Ramp-shaped
depth gauges on
each cutter
•
Bumper tie straps
CUTTER SEQUENCE
Standard sequence: 91VG
91VG F&B A107041
91VG SAW CHAIN
Oregon 91VG saw chain is specially designed to incorporate all the advan-
®
tages of our professional series in a consumer style, low-kickback saw
chain. 91VG is ideal for occasional users, but is also extremely well suited
for commercial cutters such as arborists and orchardists who prefer small-
size saws and lightweight low-profile 91-type saw chain that conforms to low
kickback performance requirements for the United States and Canada.
.050"
Features
Advanced grind geometry
Chamfer Chisel
special shaped low-vibration heels
Ramp-shaped depth gauges
Bumper tie straps with slots
Sharpens with standard 5/32"
round file and file guide
Vibe-Ban™
LubriLink ™
Lubriwell ™
AA 0806
Benefits
•
•
•
•
™
cutters with
•
•
•
•
•
•
•
tie straps
•
•
•
oil holes
•
Improved out-of-box grind
Dramatic speed improvements in all
cutting modes
Extreme cutting efficiency, less feed
force required
Twin cutting corners offering outstanding
performance, durability and easy mainte-
nance
Less vibration than competitive chains
The ramp-shape reduces kickback
energies without affecting performance
Delivers low-kickback performance
Enhances chip flow
Reduces overall weight of saw chain
Easy hand maintenance
Reduces vibration 25% or more at the
saw handle
Help keep oil where it's needed - on the
chain
Directs oil to the critical rivet flange/hole
interface
Help carry oil around the full length of the
guide bar's groove
Enhances lubrication of the bar nose
sprocket and bearings