•
Operation Check Procedure
a.
Disassembly
1) Remove the top cover.
2) Remove the clamp ass'y.
3) Unlock and remove the stabilizer from the holder.
Turn the plate clockwise by 30° while holding the stabilizer, and the plate will come off. Remove the stabilizer from
the holder. (Fig. 12)
b. Clamp the disc by using the stabilizer.
c.
Set to the TEST mode and check for any faulty.
•
When checking the P.C.B.s:
a.
Remove the top cover.
b. Remove the disc tray ass'y.
c.
Remove 3 screws ( ① ) and 2 jack screws ( ② ). (Fig. 1)
d. Remove push rivet. (Fig. 1)
e.
Remove screw ( ③ ) and screw ( ④ ). (Fig. 1)
f.
Release 4 hooks. (Fig. 1)
Frame damper
Unlock
Lock
Fig. 12
Plate
Stabilizer
Holder
OPERATION (9) P.C.B.
OPERATION (11) P.C.B.
Push rivet
3
4
Hook
Hook
Fig. 1
CD-C600
MAIN P.C.B.
1
2
1
13