Download  Print this page

Brake Lever Adjuster - Kawasaki NINJA H2 Owner's Manual

Hide thumbs

Advertisement

88
GENERAL INFORMATION
High beam...
tor: see Meter Instruments section)
Low beam...
Passing...
(The high beam turns
on only while the dimmer/passing but-
ton is pushed.)
Turn Signal Switch
When the turn signal switch is turned
to the left (
) or right (
responding turn signal lights and turn
signal indicator blinks. To cancel the
turn signal, push the switch in.
Horn Button
When the horn button is pushed, the
horn sounds.
Upper and Lower Button
The upper and lower buttons are
used for setting the meter. Refer to the
Display Select section.
(High beam indica-
) the cor-
Hazard Button
Push in the hazard button with the
ignition switch in the "ON" position. All
the turn signal lights and turn signal
indicators will blink.
NOTE
Be careful not to use the hazard
lights for an extended period of time,
otherwise the battery may become
totally discharged.

Brake Lever Adjuster

While pushing the brake lever for-
ward, turn the adjuster and choose a
suitable lever position.
[Brake Lever Adjustment]
Turn
Adjuster
in
Lever
Far
Position
Turn out
Near

Advertisement

Table of Contents

   Also See for Kawasaki NINJA H2

Comments to this Manuals

Symbols: 0
Latest comments: