MAINTENANCE AND ADJUSTMENT
Be sure the engine and exhaust are
cool before washing.
Avoid applying degreaser to seals,
brake pads, and tires.
Avoid all harsh chemicals, solvents,
detergents, and household cleaning
products such as ammonia-based
Gasoline, brake fluid, clutch fluid,
and coolant will damage the finish of
painted and plastic surfaces: wash
them off immediately.
Avoid wire brushes, steel wool, and
all other abrasive pads or brushes.
Use care when washing the wind-
shield, headlight lens and other
plastic parts as they can easily be
Avoid using pressure washers; wa-
ter can penetrate seals and electrical
components and damage your mo-
Avoid spraying water in delicate
areas such as in air intakes, fuel
system, brake components, electri-
cal components, muffler outlets, and
fuel tank openings.
Washing Your Motorcycle
Rinse your motorcycle with cold wa-
ter from a garden hose to remove any
Mix a mild neutral detergent (de-
signed for motorcycles or automo-
biles) and water in a bucket. Use
a soft cloth or sponge to wash your
motorcycle. If needed, use a mild de-
greaser to remove any oil or grease
After washing, rinse your motorcy-
cle thoroughly with clean water to re-
move any residue (residue from the