MAINTENANCE AND ADJUSTMENT
Clean the battery using a solution of
baking soda and water. Be sure that
the cable connections are clean.
Place the battery on the battery case.
Connect the positive (+) cable to the
(+) terminal, and then connect the
negative (–) cable to the (–) terminal.
Installing the (–) cable to the (+)
terminal of the battery or the (+)
cable to the (–) terminal of the
battery can seriously damage
the electrical system.
Put a light coat of grease on the ter-
minals to prevent corrosion.
Cover the terminals with the caps.
Install the removed parts.
Headlight aiming should be done by
an authorized Kawasaki dealer.
The headlight beam is adjustable
horizontally. If not properly adjusted
horizontally, the beam will point to one
side rather than straight ahead.
Turn the horizontal adjuster in or out
until the beam points straight ahead.