Download  Print this page


measure the maximum chain slack
by pulling up and pushing down the
chain midway between the engine
sprocket and rear wheel sprocket.
A. Chain Slack
If the drive chain is too tight or too
loose, adjust it so that the chain slack
is within the standard value.
Drive Chain Slack
Standard: 25 ∼ 35 mm (1.0 ∼ 1.4 in.)
Drive Chain Slack Adjustment
The drive chain slack adjustment
should be done by an authorized
Kawasaki dealer.


If you feel there is something wrong
when applying the brakes, have the
brake system checked by an autho-
rized Kawasaki dealer immediately.
Air in the brake lines diminish
braking performance and can
cause an accident resulting in
injury or death. If the brake lever
or pedal feels mushy when it
is applied, there might be air in
the brake lines or the brake may
be defective.
checked immediately by an au-
thorized Kawasaki dealer.
Have the brake


Table of Contents

   Also See for Kawasaki NINJA H2

Comments to this Manuals

Symbols: 0
Latest comments: