Additional Information - JVC KW-NT30 Instructions Manual

Menu items
Beep
Startup Message
Shutdown Message
Start-up Screen
Restore Factory Default

Additional information

File playback
Playing DivX files
(Discs only)
• This unit can play back DivX files with the extension
code <.divx>, <.div>, or <.avi> (regardless of the
letter case—upper/lower).
• Audio stream should conform to MP3 or Dolby Digital.
• The file encoded in the interlaced scanning mode
may not be played back correctly.
• The maximum bit rate for video signals (average) is
4 Mbps.
Playing MPEG1/MPEG2 files
• This unit can play back MPEG1/MPEG2 files with the
extension code <.mpg>, <.mpeg>, or <.mod>*.
* <.mod> is an extension code used for the MPEG2
files recorded by JVC Everio camcorders. The
MPEG2 files with the <.mod> extension code
cannot be played back when stored on a USB mass
storage class device.
Selectable settings
Adjust the volume of the key-touch tone.
Off, 1 to 10; Initial 5
Edit the voice message at startup/shutdown of the unit.
• To edit the message, press [Edit], enter the message, then press [OK].
You can listen to the edited message by pressing [Test].
– For entering the characters, ☞ page 11.
• The languages available for the message are: English, Spanish,
French, German, Italian, Dutch, Portuguese, Danish and Swedish.
Select the startup screen when the power is turned on.
Initialize all settings you have made. Press [Restore] to initialize the
settings.
• When restoring the settings, adjust the settings on installation setting
screen (☞ page 9).
(Discs only)
69
• The stream format should conform to MPEG system/
programme stream.
The file format should be MP@ML (Main Profile at
Main Level)/SP@ML (Simple Profile at Main Level)/
MP@LL (Main Profile at Low Level).
• Audio streams should conform to MPEG1 Audio
Layer-2 or Dolby Digital.
• The maximum bit rate for video signals (average) is
4 Mbps.
Playing MP3/WMA/WAV
* WAV files are played only when recorded on a disc.
• This unit can play back files with the extension code
<.mp3>, <.wma>, or <.wav> (regardless of the
letter case—upper/lower).
AV menu items
Initial: Underlined
files
*
Continued on the next page