Advertisement
OPERATING INSTRUCTIONS
1. Switching Your Ear Buds On and Off
NOTE: The first time you perform this operation you might find it convenient to place
only the left ear bud in your left ear. This will allow you to hold the control dongle in
your right hand so that you can see the control buttons and the LED indicator and still
hear the confirming voice prompts in your left ear. Once the ear buds have turned on
and paired with your Bluetooth device you can then place the right ear bud in your
right ear.
2. Power On / Auto-Linking Mode
PRESS and HOLD the Multi-Function Button (MFB) on the control dongle for
approximately 2 seconds until you hear the "Power On" voice prompt that confirms the
power is 'On'. The blue LED begins flashing slowly indicating that your ear buds are in
the Auto-Linking Mode and trying to re-link to a previously paired device as long as that
device is within the normal pairing range of approximately 33-feet. If your ear buds do
not find a previously paired device that is in range and turned 'on' within 3 minutes they
will switch from the Auto-Linking mode to the Power 'Off' mode to extend the battery
life.
3. Power Off
To shut the power 'Off' at any time PRESS and HOLD the Multi-Function Button (MFB)
on the control dongle for approximately 2 seconds. You will hear the voice prompt say
"Power Off". The red LED flashes three times and then the power shuts off.
4. Manually Pairing Your iHome Ear Buds With Your Bluetooth Device
NOTE: Your ear buds must be 'Off'' to begin the manual pairing process.
With the ear buds in the 'Off' mode, PRESS and HOLD the Multi-Function Button
(MFB) on the control dongle for approximately 7 seconds. After 2 seconds you will
hear the "Power On" voice prompt, and after another 5 seconds you will hear the
"Pairing" voice prompt and the LED indicator begins alternately flashing blue and red.
Release the Multi-Function Button (MFB)
Make sure that your Bluetooth device is turned 'On' and in the Pairing mode. Refer to
the instructions supplied with your device if necessary. When your device "finds" the
iB29 ear buds, you will see "iHome iB29" appear on your device's Bluetooth menu
screen together with the words "Not Paired", "Not Connected" or similar. Touch
"iHome iB29" to complete the pairing process. You will hear the voice prompt say
"Your device is connected", and you will see "iHome iB29 Connected" on your
devices Bluetooth menu. The LED indicator will slowly flash blue when you are
successfully paired. NOTE: If your Bluetooth device asks for a Password or a PIN to
complete the pairing process, enter "0000" on the keypad of your device.
You are now ready to begin streaming music wirelessly from your Bluetooth device to
your iHome iB29 Bluetooth ear buds.
5. Using Your iHome Bluetooth Ear Buds
The following chart explains the basic functions and operations of your Bluetooth ear buds.
2
Hide quick links:
Advertisement
