Download Print this page

JVC GR-FX40 Instructions Manual page 33

Compact vhs camcorder
Hide thumbs Also See for GR-FX40:

Advertisement

SPECIFICATIONS
PLAYBACK
CAUTIONS
RECORDING
PLAYBACK
MAJOR FEATURES
Animation
Basic Connections
MENU SCREEN EXPLANATIONS
Controls
Display
DANGER:
Original tape (camcorder)
[Ex.: Fader]
Tape remaining time indicator
Display
5 SEC. REC Button
Cassette holder
SYMPTOM
n Programme AE with Special Effects
Fade in
25MIN
1
Z
You can give stationary scenes or objects an illusion
1
Menu Screen Available Using The Select Dial
Dioptre Adjustment Control .................
(
pg. 20 – 21)
M 0 : 05 : 20
Video Light
1
General
CONFIRM POWER-OFF STATUS
OTHER
SEPIA
IN
OUT
of movement. This function allows you to shoot a
•Electronic Fog Filter
2
Lens Cover Open/Close Ring
Make sure the camcorder's power is off.
Format
series of pictures, each slightly different, of the same
• The video light becomes extremely hot. Do not
FOCUS
•ND Effect
[LENS COVER] ....................................
During recording, the indications do
Power source
object for a brief period of time.
touch it either while in operation or soon after
2
CONNECT CAMCORDER TO TV OR
•Sepia
1
Sepia
3
not appear.
Video Light Switch [LIGHT OFF/AUTO/ON]
Power consumption
turning it off, otherwise serious injury may result.
VCR
NOTE:
•Twilight
The scene being shot is recorded in sepia-tinted
(GR-FX40 only) ....................................
GR-FX40
• Do not place the camcorder into the carrying case
EXPOSURE
(reddish-brown) monochrome, giving the effect of
The tape will not eject.
•Sports
Pull out the connector cover and open it.
light on
4
Before performing the following steps, make sure
5-Second Recording Button
2
immediately after using the video light, since it
an older movie. Use together with Wide (
Connect as shown in the illustration (
light off
•Nega/Posi
Remote sensor
that:
[5 SEC REC] .........................................
remains extremely hot for some time.
Some functions are not available.
for the authentic look of a classic Hollywood
GR-FX30/FX10
Edited tape (VCR)
•1/2000 sec. High Speed Shutter
The Power Switch is set to "PRO.".
• When operating, keep a distance of about 30 cm
WIDE
5
Open the cover.
Power Zoom Lever [T/W] .....................
If using a VCR . . . go to step 3.
movie.
NOTES:
3
Signal system
Display
The camcorder is in the Record-Standby mode.
between the video light and people or object.
n 5-Sec. Recording (
If not . . . go to step 4.
6
Picture Stabilizer Button
Video recording system
c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the
• Do not use near flammable or explosive materials.
EFFECT
n Menu Adjustment (
1
When using the remote control, be sure to point it at
MENU Button
[P.STABILIZER] .....................................
ACCESS MENU SCREEN
Luminance
3
frequency of zooming. It is safer to have spare battery packs to cover 3 times the planned shooting time.
• It is recommended that you consult your nearest
To J terminal
To Audio
CONNECT VCR OUTPUT TO TV
SPORTS
the remote sensor. The illustration shows the
MOSAIC
Vertical white lines appear when
n Picture Stabilizer (
PUSH Button
Colour
7
(JLIP)
Press MENU.
Output
S.LX
Programme AE Button [P.AE] ................
c Charging times noted on page 4 are for a fully discharged battery pack, and discharging times are for a fully
JVC dealer for replacing the video light.
approximate transmitted beam effective area for
INPUT
shooting a very bright object.
Display
n Digital Hyper Zoom (
indoor use.
charged battery pack.
8
Fade/Wipe Button [EFFECT] .................
2
Refer to your VCR's instruction manual.
SET RECORDING TIME
The transmitted beam may not be effective or may
c Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
Sports
General Battery Precautions
9
•Rewind Button [2
Cassette
cause incorrect operation outdoors or when the
Rotate the Select Dial to move the highlight bar
c Remember to set the charge marker after charging a battery pack or after detaching a discharged one from
4
High shutter speed clearly captures fast-moving
SUPPLY POWER
Bright, crystal-shaped spots appear in
remote sensor is directly exposed to sunlight or
•Retake Rewind Button [RETAKE R] .....
Tape speed
to "NEXT" in Menu Screen 1 and press it to
your camcorder.
action.
• When the C-P6U or C-P7U (cassette adapter) is
the viewfinder.
powerful lighting.
Turn on the camcorder, the VCR and the TV.
•Quick Review Button [
Recording time (max.) : 60 minutes (with EC -60
display Menu Screen 2. Then, move the
PAUSE
c Perform the REFRESH function after no less than 5 chargings.
PROVIDED ACCESSORIES
not functioning even when correctly operated, the
0
Select Dial
highlight bar to "REC TIME" and press it. The
Select Dial
Select Dial
•Fast-Forward Button [3
Audio cable
5
c While the AC Power Adapter/Charger's power cord is disconnected from the AC outlet, it is possible to
SELECT MODE
battery is exhausted. Replace it with a fresh one.
Coloured bright spots appear all over
5S
Operating temperature : 0°C to 40°C
ND : ND EFFECT
(provided)
REC TIME Menu appears. Rotate the Select Dial
•Retake Forward Button [RETAKE F] ....
Interval timer indicator
discharge the battery by pressing the REFRESH switch. During that time, the AC Power Adapter/Charger does
• Use only the following battery:
the viewfinder.
Set the VCR to its AUX input mode, and set the
Operating humidity
to move the highlight bar to the desired time,
not charge the battery. When discharging is complete, detach the battery from the AC Power Adapter/
!
Stop Button [5 , STOP] .........................
Display
Display
Display
C-P6U or C-P7U..................... R6 (AA) size
TV to its VIDEO mode.
Select Dial
then press it. The Menu Screen reappears with
MENU/DISPLAY Button
Editing cable*
Select Dial
Charger to store it.
TITLE
@
5 Sec. Rec mode indicator
ND Effect
Connectors
Play/Pause Button
(ø3.5 mini-plug cable)
NOTES:
Please make note of the following rules for battery
the highlight bar on "RETURN". Press the Select
c High temperatures can damage the battery pack, so use only where good ventilation is available. Do not
[4 /6 , PLAY/PAUSE] .............................
A black mist darkens the picture, as when an ND
DATE/TIME DISP.
PAUSE (6 ) Button
use. When misused, battery can leak or explode.
Dial again to close the Menu Screen.
Recording Start/Stop Button
FOCUS
AUTO
JLIP
FOCUS
allow it to discharge in a container, such as a bag.
AUTO
FOCUS
AUTO
Display
It is recommended to use the AC Power Adapter/
Erase Protection
filter is used. Helps to counter the effects of glare on
EXPOSURE
EXPOSURE
AUTO
AUTO
EXPOSURE
AUTO
#
Display
Select Dial [+, –, PUSH] ..................
c If you stop recharging or discharging part way through, make sure to remove the battery pack before
1. Refer to the C-P6U/C-P7U instructions when
The viewfinder and the lens have
WIDE
OFF
WIDE
OFF
WIDE
Charger as the power supply instead of the battery
OFF
3
1MIN
START RECORDING
the subject.
STOP (5 ) Button
S.LX
S.LX
OFF
OFF
S.LX
•AC Power Adapter/
OFF
unplugging the adapter's AC cord.
$
1 2S
4
replacing the battery.
become dirty (ex. fingerprints).
NEXT
MENU/DISPLAY Button .................
pack (
pg. 5).
DISPLAY Button
TITLE
TITLE
TITLE
Press the Recording Start/Stop Button after
M . W . B .
4
AUTO
Video
NEXT
Charger AA-V15EG
DATE TIME DISP.
c Remove the battery pack from the adapter immediately after discharging.
DATE TIME DISP.
2. Do not expose the battery to excessive heat as it
DATE TIME DISP.
To monitor the picture and sound from the
%
D . ZOOM
REW (2 ) Button
ON
M . W . B .
Counter Reset/Memory Button
AUTO
focusing on the subject. The recording stops
TELE MACRO
OFF
c To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio.
D . ZOOM
can leak or explode.
ON
FG : FOG
camcorder without inserting a tape, set the
[COUNTER R/M] .................................
Menu Screen Available Using The MENU Button
DATE TIME
TELE MACRO
OFF
automatically after the selected period of time.
4
4
RETURN
RETURN
4
RETURN
An error number (i.e. E03) appears.
c Make sure you unplug the DC cord before charging or discharging the battery pack.
3. Do not dispose of battery in a fire.
Compact video cassette
TAPE LENGTH
T45
camcorder's Power Switch to "CAMERA" ("AUTO"
DATE TIME
PAUSE
Rec time indicator
Recording Start/Stop
^
EJECT Switch .........................................
This Menu Screen cannot be accessed while recording.
If your TV/VCR has the
TAPE LENGTH
T45
c The CHARGE indicator may not light properly with a brand new battery pack, or with one that has been
4. Remove battery from the unit if it is to be stored
or "PRO."), then set your TV to the appropriate
4
Button
ASSEMBLE SERIES OF PICTURES
OFF
SCART connector, use the
REW
&
stored for an extended period. In this case, remove and reattach the battery pack and recharge it. The
Recording Start/Stop Button ..................
Electronic Fog Filter
for an extended period to avoid battery leakage
FOCUS
input mode.
EXPOSURE
TITLE
(No indication)
provided cable adapter.
4
Repeat step 3 for the desired number of
RETURN
PLAY
M.W.B.
OFF
CHARGE indicator should blink during recharging. If not, contact your nearest JVC dealer.
Makes the picture look misty white, as when an
which can cause malfunctions.
Make sure you adjust the TV sound volume to its
*
4
RETURN
Power Switch ................................
AUTO
AUTO
HAPPY BIRTHDAY
AC Power Adapter/Charger AA-V15EG
pictures.
To Remote
MANU
external fog filter is attached to the lens. Softens the
MANU
HAPPY HOLIDAYS
minimum level to avoid a sudden burst of sound
Remote Sensor
(
Battery Release Switch
OUR FAMILY
PAUSE
The image is out of focus.
•Battery Pack
DATE TIME
image and gives it a "fantasy" look.
5
when the camcorder is turned on.
MOVIE STAR
Power requirement
RELEASE ANIMATION MODE
Battery Packs
[BATTERY RELEASE] ..............................
M.W.B.
PARTY TIME
BN-V12U
If you have a TV or speakers that are not specially
RM-V700U (provided with GR-FX40,
YEAR
1999
To DC IN jack
Set "REC TIME" in the Menu screen to "OFF".
MERRY CHRISTMAS
MONTH
)
PUSH Button .........................................
AUTO
optional for GR-FX30/FX10)
The battery packs are nickel-cadmium
shielded, do not place the speakers adjacent to the
WEDDING DAY
Power consumption
DAY
: FINE
TWILIGHT
CONGRATULATIONS
TIME
22 : 50
: CLOUD
or nickel metal-hydride batteries.
TV as interference will occur in the camcorder
EXIT
Output
EXIT
EXIT
: HALOGEN
The date and time displays
NOTES:
Before using the supplied battery pack
playback picture.
Charge
MWB
To PAUSE-IN
disappear.
or an optional battery pack, be sure to
VTR
For best results, make sure the camcorder is
Twilight
Recording safety hole
EXIT
read the following cautions:
D. ZOOM
• Cable Adapter
Charging system
secured when shooting in Animation or Time-
Dusk, twilight scenery, fireworks, etc., look more
EXIT
FOCUS
AUTO
1. To avoid hazard . . .
Lapse mode.
natural and dramatic. The following happens when
EXPOSURE
AUTO
WIDE
OFF
Dimensions
Fade- or wipe-in/out cannot be performed during
... do not burn.
Twilight mode is selected:
The wrong date and time are
S.LX
OFF
4
NEXT
Weight
TITLE
Animation or Time-Lapse shooting.
... do not short-circuit the terminals.
• Auto gain control is turned off.
displayed/recorded.
M . W . B .
AUTO
DATE TIME DISP.
D . ZOOM
ON
Before performing other operations following
... do not modify or disassemble.
• White Balance is set to "
TELE MACRO
OFF
Animation or Time-Lapse recording, make sure
... use only specified chargers.
but can also be manually changed to another
DATE TIME
EFFECT Button
4
RETURN
Cassette Adapter C-P7U
•Shoulder Strap
TAPE LENGTH
T45
Z
the Animation or Time-Lapse mode is deactivated.
mode (
Even though the lens cover is open,
pg. 30).
RM-V700U*
2. To prevent damage and prolong service life . . .
TELE MACRO
Self-Timer, Animation and Time-Lapse are
the Lens Cover Warning indicator
• Auto Focus becomes available only in the range of
Dimensions
... do not subject to unnecessary shock.
To brighten the image
canceled when the power is shut off or when the
4
10 m to infinity. To focus when the subject-to-
blinks.
RETURN
... avoid repeated charging without fully
Weight
* Provided with GR-FX40, optional for
cassette is ejected.
camera distance is less than 10 m, use manual
discharging.
Accessory
REC TIME
GR-FX30/FX10.
Z
focusing (
pg. 29).
•Lithium Battery CR2025
... charge in an environment where temperatures
06
• x1 for GR-FX30/FX10
are within the tolerances shown in the chart
(clock operation)
below. This is a chemical reaction type
CONGRATULATIONS
• x2 for GR-FX40 (clock
battery—cooler temperatures impede chemical
: Factory-preset
operation and remote
reaction, while warmer temperatures can
control)
RM-V700U (provided with GR-FX40,
prevent complete charging.
RM-V700U (provided with GR-FX40,
optional for GR-FX30/FX10)
optional for GR-FX30/FX10)
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Downloaded From VideoCamera-Manual.com Manuals
Features
Using The Cassette Adapter
Advanced Features
Mode
White paper
Charge marker
e 4
Audio dubbing
MIN
3
2
indicator
Transmitted beam
(Now calculating)
IN OUT
IN
Sepia
effective area
: VHS PAL standard
AUTO
: DC 6.0 V
60MIN
MANU
AUTO
4
59MIN
: 8.1 W
Z
MANU
Open
: 5.2 W
Fade out
the cover.
: 5.2 W
OFF
3MIN
: PAL-type
Z
pg. 17)
Remote sensor
ON
VCR
After 2 sec.
Z
pg. 24, 25, 26)
: FM recording
2MIN
To Video
Sports
Z
pg. 16)
EJECT Switch
(Blinking)
: Converted sub-carrier
Output
MAX
direct recording
Z
Power lamp
pg. 14)
Conforms to VHS standard
RETAKE (R/F) Button
EFFECT
Compartment door
1MIN
, REW] ................
:
cassette
P.AE Button
(Blinking)
MOSAIC
NORMAL
: 23.39 mm/sec.
R] .............
EFFECT Button
0MIN
cassette)
Power Switch
Power Switch
Power Switch
, FF] ............
Video cable
(Blinking)
OFF
(provided)
ND Effect
: 35% to 80%
Power Switch
Turn to take
Power Switch
up slack.
Microphone
Power Switch
Allows you to superimpose one of eight preset titles (
FADER
Menu Screen
Menu Screen
Menu Screen
Makes the date/time settings appear in the camcorder or on a connected monitor
: ø3.5 mm, 4-pole, mini-head
Z
Gear
(
pg. 22).
MOSAIC
jack
INDEX
(compatible with RC-5325 plug)
•Cassette Adapter
Menu Screen
pg. 13, 24
To AUDIO
Menu Screen
SHUTTER
: 1 Vp-p, 75 W unbalanced,
C-P7U
and VIDEO IN
Sliding latch
analogue output
connectors
Electronic
(via Video output connector)
SLIDE
Fog Filter
A. DUB
OFF
Power Switch
STOP
EXPOSURE Menu
FOCUS Menu
TITLE Menu
AUTO
pg. 12, 34
Remote sensor
: FINE
Reels
•Remote Control
VCR
DATE/TIME Menu
: AC 110 V to 240 V` ,
: CLOUD
RM-V700U
M.W.B. Menu
To AC outlet
50/60 Hz
1
(GR-FX40 only)
: 23 W
: HALOGEN
1
Twilight
24-hour indication
MWB
DC OUT
: DC 8.5 V
, 1.3 A
terminal
: DC 6.3 V
, 1.8 A
Manual Exposure
Manual Focus Screen
ON
: Constant current, peak
Screen
detection, timer controlled
00
TV
• Audio/Video
: 140 (W) x 42 (H) x 68 (D) mm
Exposure control
AC Power
(A/V) cable
: Approx. 300 g
DC Cord
OFF
level counter
Adapter/Charger
" (FINE day mode),
AA-V15EG
Power
Switch
OFF
To car's
: 188 (W) x 25 (H) x 104 (D) mm
START/STOP
ON
cigarette
: Approx. 240 g
•Editing Cable
lighter socket
: "R6 (AA)"-size battery x 1
(GR-FX40 only)
INT. TIME
06
VCR REC STBY
Recording Start/Stop
ON/OFF
Car Battery
Button
Charger/Adapter
To darken the image
BH-V3E (optional)
•DC Cord
CONTENTS
Cassette Adapter
Tracking
Manual White Balance Operation
Audio Dubbing
Time-Lapse
Tape Dubbing
Loading/Unloading A Cassette
Shoulder Strap Attachment
AUTOMATIC EDITING TO VCR
Instant Titles
Fade/Wipe
Exposure Control
MAKE CONNECTIONS
Date/Time Settings
Connectors
... store in a cool, dry place. Extended exposure to
Charge Marker
MANUAL FOCUS
Camcorder
GETTING STARTED
4
STOP RECORDING
Self-Timer, Animation and
POSSIBLE CAUSE(S)
5Sec. Rec (5-sec. Recording)
Quick Review
FEATURE:
FEATURE:
FEATURE:
high temperatures will increase natural
A charge marker is provided on the battery pack to
Press the Recording Start/Stop Button again to stop
1
9
Time-Lapse
This feature automatically adjusts the iris for the best
The camcorder has eight preset titles in memory. You can
These effects let you make pro-style scene transitions.
Use this to play back a VHS-C video cassette recorded
You can record a new soundtrack on a prerecorded tape
This function can be used to eliminate noise bars that
NOTE:
If the camera is operating in PRO. mode, perform a
You can record sequentially at preset time spans.
q
pg. 10
PREPARE SOURCE TAPE
CONNECT TO . . .
DC IN Jack ............................................
discharge and shorten service life.
1
1
1
1
help you remember whether it has been charged or
CONNECT EQUIPMENT
OPEN CASSETTE HOLDER
ATTACH STRAP
ACCESS MENU SCREEN
recording.
PURPOSE:
PURPOSE:
OUT
Fade- or wipe-in works at recording start, and fade- or
superimpose one of them above a previously stored title as
available picture quality, but you can override and make
(normal audio only).
with this camcorder on a VHS VCR. It is fully compatible
appear on-screen during playback. Initial setting is Auto
Manual White Balance when shooting under various types
Leaving the camcorder aimed at a specific subject,
... avoid prolonged uncharged storage.
Rewind the tape in the camcorder to the beginning of
not. Two colours are provided (red and black)—you
You should already have made the necessary viewfinder
The connectors
Clock (Lithium) Battery Insertion/
Following the illustration at left, thread the strap
Slide EJECT until the holder opens. Do not use force
Set the Power Switch to "PRO.", then press
JVC VCR EQUIPPED WITH REMOTE
Following the illustration on pg. 38, connect the
Storage temperature : –20°C to 50°C
wipe-out works at recording end or when you enter
shown in the illustration on left.
the adjustment manually.
Adjusts focus automatically.
with any VHS video cassette recorder. The C-P7U adapter
Tracking. Manual Tracking is also available.
of lighting.
PURPOSE:
To record a scene for 5 seconds, providing quick scene
To check the end of the last recording.
you can record subtle changes over an extended
... remove from charger or powered unit when
Perform steps 1, 2 and 3 of the Insert Editing procedure
the scene you want to edit and press PAUSE.
choose which one means charged and which means
pg. 12
adjustments (
cover.
•The camcorder re-enters the Record-Standby mode.
Removal ........................................ 6
to open.
through the top of the eyelet
camcorder and the VCR.
Press DISPLAY for longer than 1 second to make the
Weight
PAUSE TERMINAL
Record–Standby mode.
is battery powered and automatically performs tape
transitions like those seen in TV programmes.
period of time.
The remote control lets you set/release Interval Timer
not in use, as some machines use current even
(
OPERATION:
pg. 46) before continuing.
•The power lamp comes on.
discharged.
continuing.
Allows you to adjust focus manually (
1
1
1
1
High-Speed Shutter (1/2000s.)
thread it through the buckle
w
indications appear (
Video Output Connector ......................
ACTIVATE MANUAL TRACKING
SELECT OPERATION MODE
Date/Time Settings
GR-FX40
Connect the editing cable to the Remote PAUSE
10
SELECT OPERATION MODE
SELECT OPERATION MODE
loading and unloading.
NOTES:
ENGAGE VCR'S RECORD-PAUSE MODE
and Rec Time functions without using the Menu
when switched off.
2
2
•The sound comes from the built-in microphone.
OPERATION:
1) Press "
PREPARE FOR DUBBING
" and release quickly during the Record–
INSERT/REMOVE CASSETTE
NOTE:
1
to attach the other end of the strap to the other eyelet
Captures faster action than Sports mode.
pg. 18
SELECT OPERATION MODE
GR-FX30
terminal.
Set the Power Switch to "PRO.".
Set the Power Switch to "PRO.".
Press P.AE and EFFECT simultaneously. Then, press
Follow steps 1 through 4 of the white balance
e
Adjusts exposure automatically.
2
1
Audio Output Connector .....................
Tape Length Setting
Screen.
SELECT OPERATION MODE
SELECT FUNCTION
Point the remote control towards the VCR's infrared
1) During Record–Standby, press
Standby mode.
c The cassette holder cannot be opened unless a power
3
Make sure the label is facing outward.
1
Set the camcorder's Power Switch to "PLAY",
NOTES:
, making sure the strap is not twisted.
The battery pack is running low.
INSERT BATTERY
Set the Power Switch to "PRO.".
1
P.AE or EFFECT as many times as necessary until the
adjustment (
GR-FX10
Before performing the following steps, make sure
FIND EDIT-IN POINT
JVC VCR NOT EQUIPPED WITH REMOTE
Rotate the Select Dial to move the highlight bar to
sensor and press VCR REC STBY, or manually engage
Loading/Unloading A Cassette
r
appears and 5Sec. Rec is reserved.
Set the Power Switch to "PRO.".
J Terminal [JLIP (Joint Level Interface Protocol)
supply is attached.
OPERATION:
2
2
Allows you to adjust exposure manually (
Tape is rewound for about 2 seconds and played
pg. 25)
turn on the VCR's power, and insert the
n
pg. 38).
ACCESS MENU SCREEN
ACCESS MENU SCREEN
Dimensions
noise bars disappear.
Slide the battery cover up to remove it, and install
that:
pg. 17
It is normal for the battery pack to be warm after
3
2
the VCR's Record-Pause mode.
Press REW to go a little beyond the beginning of the
PAUSE TERMINAL BUT EQUIPPED WITH
"DATE/TIME", then press it. The DATE/TIME Menu
NEGA POSI
2) Press the Recording Start/Stop Button. Recording
CLOSE CASSETTE HOLDER
Connector]
c There may be a delay after you slide
ADJUST LENGTH
The Power Switch is set to "AUTO".
2
2
Self-Timer
back automatically, then pauses in Record–Standby
Grip Adjustment
appropriate cassettes in the camcorder and the
SET MANUAL WHITE BALANCE
ENGAGE FADE- OR WIPE-STANDBY
Press the Select Dial to display the Menu Screen.
Press the Select Dial to display the Menu Screen.
one "R6(AA)" size battery as shown in the
2
charging, or after use.
The Power Switch is set to "PRO.".
Does not display black bars.
ACCESS MENU SCREEN
scene onto which you want to dub the new audio,
appears.
R.A. EDIT CONNECTOR
pg. 14
starts, and after 5-second recording is finished, the
holder opens. Do not use force.
Press PUSH and make sure the holder is closed and
Certain combinations of modes or effects are not possible
1) Set
• Connect the editing cable when performing
mode for the next shot.
Adjust as shown in the illustration at left
VCR.
•To return to Auto Tracking, press P.AE and EFFECT
11
Viewfinder Adjustment
Hold a sheet of plain white paper in front of the
MODE
illustration on left, then reattach the cover.
Temperature Range Specifications
The camcorder is in the Record-Standby mode.
BEGIN AUTOMATIC EDITING
press PLAY to view the recorded tape, then press
Press the Select Dial to display the Menu Screen.
c The tape remaining time is displayed in the viewfinder
camcorder reenters the Record–Standby mode
3
3
Allows you to record black bars at the top and bottom of the screen
locked.
Connect the editing cable to the R.A.EDIT
to use.
Instead of performing steps 1 through 4 on pg. 32
Random Assemble Editing (
simultaneously. "AT" blinks. When Auto Tracking
ACCESS "TITLE" MENU
ACCESS "EXPOSURE" MENU
Pickup
NOTE:
Charging .............. 10°C to 35°C
subject. Adjust zoom or position yourself so that the
Press EFFECT to cycle through the modes as shown at
•If you decide you want to return the date and time
Nega/Posi (Negative/Positive)
3
Shoulder Strap Attachment
Press MENU/DISPLAY on the camcorder, and the
PAUSE at exactly the point where dubbing should
SELECT VCR MODE
automatically.
to produce a cinema-like "wide-screen" effect.
as shown.
connector.
2
("Self-Timer"), press INT. TIME on the remote control.
1
• It is used to connect the camcorder to a device
pg. 16
INSERT CASSETTE IN ADAPTER
finishes, the indication disappears.
ACCESS MENU SCREEN
Rotate the Select Dial to move the highlight bar to
Move the highlight bar to "TITLE" by rotating the
Lens
Operation ............ 0°C to 40°C
3
white paper fills the screen.
Distortion may occur at the start of playback. This is
left. Once the desired mode appears, it is selected
NOTES:
to the previous settings, rotate the Select Dial to
ACCESS "FOCUS" MENU
The colours of a picture are reversed.
previously selected scenes are copied to the VCR in
start.
To cancel the 5Sec. Rec. function, press
c The remaining time indicated in the viewfinder is
Tripod Mounting
n
This sometimes occurs when the contrast between the
Each time INT. TIME is pressed, the Interval Timer
Engage the VCR's AUX and Record-Pause
such as a personal computer.
Storage ................ –10°C to 30°C
Select Dial while in Record-Standby. Then press it to
"EXPOSURE" and press it.
VCR OTHER THAN TYPE
Slide the latch to open the adapter compartment
Press MENU.
To record a subject in a darkly lit environment, it is more
pg. 20
normal.
and reserved.
move the highlight bar to "EXIT" and press it, then
NOTES:
the specified order.
Move the highlight bar to "FOCUS" by rotating the
again so that "
c The cassette holder can't be opened unless a power
approximate.
background and the object is great. It is not a defect of the
3
indicator appears, changing in the following order:
modes.
ENTER SETTING
For further details consult your nearest JVC
Recharging time is based on room temperature of
display the TITLE Menu.
2
convenient to shoot the subject with a brighter image even if the
door, then insert the cassette and close the
Connect the editing cable to the RM-V700U's
ENGAGE AUDIO DUB-STANDBY MODE
RECORDING
go to step 6.
While editing, the R.A. Edit counter of the scene
Select Dial, then press it.
pg. 19
c The time required to calculate the remaining tape
4
supply is attached.
camcorder.
2
15S, 30S, 1MIN, 5MIN and No indication (off).
When noise bars appear during playback, the
20°C.
NOTE:
ACCESS MANUAL EXPOSURE
dealer.
SET INTERVAL BETWEEN
•The selected mode's name and its indication are
picture becomes slightly coarse.
Press the Select Dial until "MWB" begins blinking.
compartment door.
PAUSE-IN connector.
•If you want to set only the time without changing
Retake
FEATURE:
4
Press and hold A. DUB, and without releasing
which is being copied is shown with a blinking
FIND EDIT-IN POINT
4
c Make sure that the tape is not slack when loading the
length, and the accuracy of the calculation, may vary
2) Release
Viewfinder
The lower the temperature, the longer recharging
pg. 34
camcorder enters the Auto Tracking mode and "AT" is
• JLIP-controlled editing from camcorder to VCR
Z
SELECT THE DESIRED MODE
displayed for approx. 2 seconds. Then the name
Fade/Wipe (
Rotate the Select Dial to move the highlight bar to
RECORDINGS
4
ACCESS MANUAL FOCUS
the date, go to step
highlight.
A. DUB, press and release PAUSE.
To record a subject in a dimly lit environment, when it is more
Sunlight is directly entering the lens. This is not a defect of
according to the type of tape used.
cassette. If there is any slack, turn the gear on the
3
2
Engage the camcorder's Play mode to find a spot
Instead of setting "INT. TIME" to "OFF" in the Menu,
•When the setting is completed, "MWB" stops
takes.
GR-FX40/FX10
displayed.
pg. 15
PLAY BACK ON CONNECTED VCR
PREPARE CAMCORDER
is not possible if the VCR is not equipped with a
disappears, and only the indication remains.
"MANU", then press it. "00" (exposure control level
Move the highlight bar to the desired mode by
pressing 5SEC. REC.
Rotate the Select Dial to move the highlight bar
Basic Features
PURPOSE:
Rotate the Select Dial to move the highlight bar to
convenient to shoot with a less coarse picture although the
the camcorder.
c The tape remaining time indicator is correct only if the
cassette in the direction of the arrow to take up the
just before the edit-in point. Once it is reached,
press INT. TIME on the remote control until the
blinking, and the Menu Screen reappears with the
GR-FX30
pg. 15
3
Manual Tracking may not work with tapes recorded on
J terminal.
counter) appears.
rotating the Select Dial, then press it. The desired
3
Insert a recorded tape and set the Power Switch to
Load the cassette adapter into the VCR and play the
SET DATE
•Pressing START/STOP on the remote control does
BEGIN AUDIO DUBBING
to "NEXT" in Menu Screen 1 and press it to
To re-record certain segments.
"MANU", then press it. " " and "
subject becomes slightly dark.
3
Advanced Features
slack.
correct tape length has been selected (
press PLAY/PAUSE (4 /6 ) on the camcorder.
Interval Timer indicator disappears.
START OR END RECORDING
highlight bar on "RETURN".
other VCRs or camcorders.
White balance
mode is activated.
"PLAY".
tape back as you would any other.
pg. 34
Cassettes
not start editing.
Rotate the Select Dial to move the highlight bar to the
display Menu Screen 2. Then, move the
Press PLAY. When the counter reaches "0:00:00",
focus is locked at this point.
The viewfinder are made with high-precision technology.
5
c Make sure the Erase Protection tab is in the position that
c "TAPE END" appears when the tape reaches its end, and
Tripod Mounting
Indicators
Animation
adjustment
OPERATION:
ADJUST EXPOSURE
Press the Recording Start/Stop Button to activate fade-
Allows you to shoot dark scenes with no picture brightness
pg. 15
item you want to set and then press it. When the
highlight bar to "INT. TIME" and press it. The
PLAYBACK
5
Audio Dubbing stops automatically and the
4
START EDITING
However, black spots or bright spots of light (red, green or
4
CLOSE MENU SCREEN
allows recording. If not, slide the tab. Some cassettes
the power goes off automatically if left in this condition
3
•If you wish to make the title indication disappear,
12
1) Set
1) Make sure the camcorder is in the Record–Standby
REMOVE CASSETTE FROM ADAPTER
PREPARE VCR
in/out or wipe-in/out.
adjustment.
END AUTOMATIC EDITING
To brighten the image . . .
To properly use and store your cassettes, be sure to
5
ADJUST FOCUS
setting begins blinking, rotate the Select Dial until the
INT. TIME Menu appears. Rotate the Select Dial
camcorder enters the Audio Dub-Standby mode.
pg. 34
blue) may appear constantly in the viewfinder. These spots
t
have removable tabs. If the tab has been removed, cover
for 5 minutes. "TAPE END" also appears when a cassette
Tally Lamp ...........................................
Press PLAY/PAUSE (4 /6 ) on the camcorder and
select "OFF".
Instead of performing steps 1 and 2 on pg. 33
Press the Select Dial again to close the Menu Screen.
mode.
read the following cautions:
.... rotate the Select Dial upward. The exposure
1
Slide the latch and the compartment door opens
Turn the power on, insert a recordable tape and
When all selected scenes have been copied, the
to move the highlight bar to the desired time,
ALIGN AND TIGHTEN
correct setting appears and then press it. The setting
To farther subject . . .
are not recorded on the tape. This is not due to any defect
4
whose tape is already at its end is loaded.
the hole with adhesive tape.
engage the VCR's Record mode.
("Animation"), press REC TIME on the remote
TO CANCEL FADE- OR WIPE-STANDBY
2) Press either RETAKE to reach the start point for new
y
control level counter increases (maximum +06).
4
Power Lamp ........................................
engage the AUX mode (refer to the VCR's instructions).
automatically. This may take around 10 seconds. Do
camcorder and VCR enter the Still or Pause mode.
END AUDIO DUBBING
stops blinking.
1. During use . . .
then press it. The Menu Screen reappears.
Align the screw and camera direction stud on the
Features ........................................ 35
5
.... rotate the Select Dial upward. " " appears and
of the unit. (Effective dots: more than 99.99 %.)
CLOSE MENU SCREEN
c If the Record–Standby mode continues for 5 minutes
c The cassette holder cannot be opened while the
control. Each time REC TIME is pressed, the Rec
pg. 34
recording. Pressing "F" forwards the tape and
MODE
not attempt to force the adapter open. Then, insert
Press STOP on both units. To make the R.A. Edit
Go to step 6.
... make sure the cassette bears the VHS-C mark.
tripod with the camera's mounting socket and stud
6
Press STOP.
Audio
blinks.
STOP EDITING TEMPORARILY
Using The Cassette Adapter
Other Parts
without performing Zoom or any other operations, the
camcorder is in the record mode.
The Menu Screen reappears with the highlight bar on
To Change The Tint For Recording . . .
3
Time indicator appears, changing in the following
pressing "R" reverses it.
•Repeat this procedure until you're satisfied with the
Press EFFECT repeatedly until "OFF" appears.
SET RECORDING TIME
your finger in the hole on the underside of the
pg. 7, 24
counter display disappear, press ON/OFF.
... be aware that recording onto prerecorded tapes
hole. Then tighten the screw.
Wipe them gently with a soft cloth. Gently wipe in a
To darken the image . . .
Go to step 6.
Engage the VCR's Record-Pause mode and press
camcorder's power shuts off automatically. Set the
"RETURN". Then press the Select Dial to close the
.... in step 2, substitute coloured paper for white. The
order: 1/4S, 1/2S, 1S, 5S and No indication (off).
Basic Connections And Tape Dubbing
3) Press the Recording Start/Stop Button to start
Date settings ("YEAR", "MONTH" and "DAY").
adapter as shown in the illustration at left, and push
Rotate the Select Dial to move the highlight bar
automatically erases the previously recorded
.... rotate the Select Dial downward. The exposure
semicircular motion, as wiping strongly spreads the stain
u
Battery Pack Mount ...............................
PLAY/PAUSE (4 /6 ) on the camcorder.
Power Switch to "POWER OFF", and then back to
Menu Screen.
white balance is adjusted based on the colour,
•"OFF" is displayed for approx. 2 seconds and the
2) Release
NOTES:
recording.
To nearer subject . . .
•When finished editing, be sure to disconnect the
up and remove the cassette.
to "REC TIME", then press it. The REC TIME
video and audio signals.
control level counter decreases (maximum –06).
and it won't come out easily.
USING THE REMOTE
4
"CAMERA" to turn the camcorder on again.
changing the tint. Red paper — deeper green; blue
fade/wipe standby mode is canceled.
i
Instead of using the Menu in step 5 on pg. 33, press
SET TIME
.... rotate the Select Dial downward. " " appears
editing cable and the audio/video cable.
Viewfinder ...........................................
NOTE:
... make sure the cassette is positioned properly
Menu appears. Rotate the Select Dial to move
7
Do not press FF or REW during Audio Dub-Standby, or
EDIT MORE SEGMENTS
NOTES:
Go to step 6.
c If the Recording Start/Stop button is pressed after the
paper — orange; yellow paper — deeper purple.
CONTROL UNIT
pg. 36
CAUTION:
REC TIME on the remote control until the Rec Time
and blinks.
Rotate the Select Dial to move the highlight bar to
when inserting.
o
the highlight bar to the desired time, then press
Grip Strap ............................................
Noise bars appear and pictures may become
the edit points will not be accurate.
Turn the camcorder's power off, then disconnect the power
NOTES:
Repeat steps 4 through 6 for additional editing,
Record-Standby mode has continued for over
indicator disappears.
"TIME" and then press it. When the hour setting
During tape loading and unloading, do not touch the
Go to step 6.
pg. 9
... do not load and unload the cassette repeatedly
6
it. The Menu Screen reappears with the
When using a tripod, be sure to open and extend
NOTES:
monochrome or darken during Retake. This is normal.
source. After a few minutes, try turning the power on again.
If the microphone is too close to the TV, or if the TV's
END ADJUSTMENT OF EXPOSURE
p
• Camera sensor
then stop the VCR and camcorder when
5 minutes, recording may not start immediately.
Time-Lapse
If you performed step 1
reels for safety and tape protection.
begins blinking, rotate the Select Dial until the correct
FADER
without allowing the tape to run at all. This
highlight bar on "RETURN". Press the Select
If the error number still appears in the viewfinder, consult
volume is too high, whistling or howling may occur.
pg. 12
its legs fully to stabilise the camcorder. To
Press the Select Dial. The Menu Screen reappears
Be careful not to cover this area; a sensor
finished.
c If you are recording on a cassette from the middle (such
6
In step 2, it may be difficult to focus on the white paper
Insert Editing
NECTIONS"), keep the remote control pointed at the
END ADJUSTMENT OF FOCUS
1) Set
setting appears and then press it. When the hour
During special-effect playback (slow motion, still frame,
slackens the tape and can result in damage.
This camcorder's Automatic Colour Temperature system senses
Dial again to close the Menu Screen.
your nearest JVC dealer.
prevent damage to the unit caused by falling
with the highlight bar on "RETURN".
Fades in/out to a black screen.
necessary for shooting is built-in here.
as when a tape is removed and re-inserted during
in some circumstances. In such a case, adjust focus
NOTES (for Insert Editing and
VCR during editing.
Instead of performing steps 1 through 3 on pg. 33
setting stops blinking and the minute setting begins
Provided Accessories ..................
etc.), the picture may vibrate or noise bars may appear
Press the Select Dial. The Menu Screen reappears
Audio Dubbing
... do not open the front tape cover. This exposes
the colour temperature of the ambient lighting for automatic
over, do not use a small-sized tripod.
• Remote Sensor ..................................
recording), use the Retake function (
manually (
4
The on-screen display only appears while the camcorder
("Time-Lapse"), press INT. TIME and REC TIME on
START TIME-LAPSE RECORDING
on the screen.
blinking, rotate the Select Dial until the correct setting
with the highlight bar on "RETURN".
the tape to fingerprints and dust.
white balance adjustment. However, precise colour adjustment
Audio Dubbing):
7
MOSAIC (Fader)
The dioptre needs to be adjusted (
CLOSE MENU SCREEN
USING AC POWER
the end of the last recording so you don't erase any of it.
A subject can be shot under various types of lighting
TROUBLESHOOTING
Q
searches for each scene.
the remote control. Each time INT. TIME is pressed,
Video Light (GR-FX40 only) ..................
appears and then press it. The minute setting stops
is not possible under the following conditions:
To record on a VCR using a compact cassette and the
pg. 4
Press the Recording Start/Stop Button. Recording
The scene being shot is adversely affecting the operation of
2. Store cassettes . . .
Press the Select Dial. The Menu Screen disappears
Optional Accessories
7
Insert Editing and Audio Dubbing may not work
c The LENS COVER warning blinks for about 5 seconds
Gradually turns/returns the picture into/from a mosaic
conditions indoors (natural, flourescent, candlelight,
CLOSE MENU SCREEN
There may be noise at in- or out-points on the edited
the Interval Timer indicator appears, changing in the
Use the AC Power Adapter/Charger (connect as
adapter, cover the adapter's recording safety hole with
blinking.
W
• When an object is in various shades of the same colour.
and intervals alternate automatically.
Microphone .........................................
Auto Focus (
... away from heaters or other heat sources.
pg. 28).
pg. 9
and the exposure control level counter reappers to
correctly if the tape contains blank segments, or if the
when the camcorder is turned on with the cover closed.
pattern.
etc.). Because the colour temperature is different
tape with certain VCRs.
following order: 15S, 30S, 1MIN, 5MIN and No
shown in the illustration).
INDEX
Press the Select Dial. The Menu Screen disppears and
adhesive tape.
• When a predominantly red or brown object is being shot outdoors.
• Battery Packs BN-V12U, BN-V20U, BN-V856U
... out of direct sunlight.
E
indicate the exposure is adjusted.
Eyepiece
5
recording speed was changed during the original
c To turn the tally lamp off during recording, refer to pgs.
depending on the light source, the tint of the subject will
5
START CLOCK OPERATION
indication (off). Each time REC TIME is pressed, the
RELEASE TIME-LAPSE MODE
"
" reappears to indicate the focus is locked.
In these cases, use the camcorder's built-in preset filters for
If you remove the power source from the camcorder while
NOTES:
... where they won't be subject to unnecessary
• Car Battery Charger BH-V3E
SHUTTER (Wipe)
recording.
24 and 26.
differ depending on the white balance settings. Use this
R
Shoulder Strap Eyelets ..........................
Rec Time indicator appears, changing in the
When none of these settings (YEAR, MONTH, DAY,
NOTES:
To release when "
white balance adjustment (
the power is on, all settings and selections are erased. Make
shock or vibration.
• Compact VHS (
NOTES:
To edit/dub onto a tape, make sure the Erase Protection
c The provided AC Power Adapter/Charger features
function for a more natural result.
following order: 1/4S, 1/2S, 1S, 5S and No indication
Indications
A black screen moves in from the top and bottom, closing
TIME) blinks, rotate the Select Dial to move the
T
"REC TIME" and "INT. TIME" in the Menu
Clock Battery Slot ..................................
... where they won't be exposed to strong
sure to turn the camcorder's power off before disconnecting
• Active Carrying Bag CB-V7U
c To return to the factory setting, select "AUTO" in step
Viewfinder Indications
tab is in the position that allows recording. If not, slide
Allows you to use the Digital Zoom. By digitally processing and
automatic voltage selection in the AC range from
Once you adjust white balance during Manual White
(off).
over the image like a shutter, or a new image pushes open
To return to Auto Focus, select "AUTO" in step 4.
highlight bar to "EXIT", and press it. The Menu
Screen to "OFF". To release when
the power source.
magnetic fields (such as those generated by
Y
• Remote Control Unit RM-V700U
c To re-adjust exposure, repeat the procedure from step
Tripod Mounting Socket .......................
magnifying images, zooming is possible from 16 times (the optical
CAUTIONS
the tab. Some cassettes have removable tabs. If the tab
110 V to 240 V.
Balance operation, the setting is retained even if the
2) Release
To re-adjust Manual Focus, repeat the procedure from
the black screen vertically from the centre.
Screen reappears with the highlight bar on
"
motors, transformers or magnets).
Press DISPLAY to make the following indications appear/
zoom limit), to a maximum of 50
has been removed, cover the hole with adhesive tape.
c When using the DC cord, make sure you connect
power is turned off or the battery removed.
Instead of using the Menu in step 5 on pg. 33, press
step 2.
"RETURN".
Some accessories are not available in some areas. Please
press the Recording Start/Stop Button to display
If you have not performed Date/Time Setting (
... vertically, in their original cases.
disappear from the camcorder's display: cassette warning,
Terminals
SLIDE (Wipe)
Do not press STOP during Insert Editing or Audio
the end of the cord with the core filter to the
SPECIFICATIONS
consult your nearest JVC dealer for details on accessories
INT. TIME and REC TIME on the remote control until
Be sure to focus the lens in the maximum telephoto
Digital Zoom is not available. Only optical zoom (maximum
"
date and time are not displayed/recorded correctly. Be sure
tape remaining time, battery pack remaining power
6
Dubbing, or the edit points will not be accurate.
camcorder. The core filter reduces interference.
and their availability.
CLOSE MENU SCREEN
the indicators disappear.
position when you use the Manual Focus mode. If you
16x magnification) can function. When set to "OFF" during
A black screen moves in from the left to gradually cover
TIME" in the Menu Screen to "OFF".
that Date/Time setting is carried out.
indicator and tape length indicator (
Main Unit
During Insert Editing and Audio Dubbing, when Insert-
Press the Select Dial.
Digital Zoom, zoom magnification changes to 16x.
focus in on a certain subject in the wide-angle position,
OPTIONAL ACCESSORIES
the image, or a new image moves in from right to left.
NOTE:
USING A CAR BATTERY
E & O.E. Design and specifications subject to change
Pause or Audio Dub-Standby is engaged, the counter
1
sharply focused images cannot be obtained when
The Lens Cover Warning indicator may blink when the
PRESS DISPLAY BUTTON
Also refer to pgs. 32 and 33.
1. For safety, DO NOT . . .
Usually the distance to a subject where the lens is in focus
without notice.
Use the optional Car Battery Charger/Adapter
may go slightly past "0:00:00". Recording, however,
NOTES:
zoomed in because the depth-of-field is reduced at
camcorder is used in dark areas, regardless of the position
To turn off the indications, press
... open the camcorder's chassis.
depends on the zoom magnification. Unless there is a distance of
NOTE:
(connect as shown in the illustration).
stops at exactly 0:00:00.
longer focal lengths.
of the lens cover.
c Pressing and holding the Recording Start/Stop Button
... disassemble or modify the unit.
than 1 second.
more than 1m to the subject, the lens is out of focus at the
To display the date and time in the camcorder's display
When the focus level cannot be adjusted any farther or
NOTES:
allows you to vary the length for the image during fade
maximum telephoto setting. When set to "ON", you can shoot a
Press again for more than 1 second to make the
... short-circuit the terminals of the battery pack.
and on a connected TV, see "Date/Time Insert"
closer, " " or " " will blink.
in/out or wipe in/out.
subject as large as possible at a distance of approx. 60 cm.
Keep it away from metallic objects when not in
indications reappear.
c When using the car battery, leave the engine
Z
(
pg. 22).
+
06
c The screen becomes slightly reddish when the Fade/
use.
• Depending on the zoom position, the lens may go out of focus.
idling.
NOTE:
Wipe is used with Sepia (
... allow inflammables, water or metallic objects
c The optional Car Battery Charger/Adapter (BH-V3E)
c With the Electronic fog filter mode (
to enter the unit.
Even if the indications are off, the tape remaining time
can also be used to charge the battery pack (except
the image fades in/out to a white screen.
... remove the battery pack or disconnect the
appears blinking when the tape is near its end, and the
BN-V20U/V856U).
power supply while the power is on.
battery pack remaining power indicator appears blinking
c When using the optional Car Battery Charger/
... leave the battery pack attached when the
when the power is almost gone.
Adapter, refer to the respective instruction booklet.
camcorder is not in use.
Display
............................................ 4
1/2000 sec.
S 1/2000
w
r
to
are located beneath the
High Speed Shutter
pg. 10). If you haven't, do so before
1
, then fold it back and
Z
pg. 28, 29).
2
. Repeat the procedure
pg. 13).
............................. 7
: Approx. 750 g
: Approx. 710 g
............................. 8
5SEC. REC. "
pg. 30), and select "MWB".
: Approx. 740 g
Z
pg. 27).
: 91 (W) x 119 (H) x 198 (D) mm
............................... 10
(with the viewfinder fully tilted
downward)
......................10
: 1/4" format CCD
.................. 11
: F1.6, f = 3.9 to 62.4 mm, 16:1
............................... 11
power zoom lens with auto iris
5S" disappears.
and macro control, filter
diameter 40.5 mm
: Electronic viewfinder with
pg. 19) cannot be activated by
................................ 12
4.
: • 0.5" black/white CRT
................................. 14
: • 0.55" colour LCD
............................19
: Auto/Manual adjustment
NEGA POSI mode
................................. 34
Z
pg. 23).
: –8 dBs, 1 kW analogue output
................. 37
(via Audio output connector)
...................42
on page 43 ("MAKE CON-
.................................. 46
................................. 47
Z
pg. 29).
pg. 10).
Z
pg. 30, 31).
) Cassettes EC-60/45/30
..................................... 52
" and "
" are not displayed,
times digital magnification.
", then set "REC TIME" and "INT.
Z
DISPLAY for more
Z
pg. 21).
Z
CONTINUED ON NEXT PAGE
CONTINUED ON NEXT PAGE
33
29
13
35
19
15
45
23
49
47
51
53
55
27
43
25
41
21
39
17
37
11
31
3
3
EN
EN
Mode
pg. 5
MENU.
pg. 38
pg. 38
5S"
............... 9
Nega/Posi
EJECT until the
4
.
pg. 42– 45).
5SEC. REC
OR
" appear. The
Z
pg. 8).
pg. 12
pg. 12
.......38
pg. 4
pg. 10
pg. 10
pg. 3
pg. 41
pg. 15) to find
pg. 18
pg. 47
.......50
pg. 11
" is displayed, set
pg. 6
4.
pg. 11
2.
pg. 7), the
pg. 52).
pg. 21) engaged,

Advertisement

loading

This manual is also suitable for:

Gr-fx30Gr-fx10