JVC GR-FX40 Instructions Manual page 32

Compact vhs camcorder

Hide thumbs Also See for GR-FX40:

Instructions manual (60 pages)

page of 56

/ 56
Bookmarks

If, after following the steps in the chart below, the problem still exists, please consult your JVC dealer.

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic

These are some basic types of connections. When making connections, refer also to your VCR and TV

2. Avoid using the unit . . .

Display

P. STABILIZER Button

Focus detection zone

LENS COVER Open/Close Ring

Power Zoom Lever

Dear Customer,

Power Switch

instruction manuals.

operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. The RM-V700U remote control unit

... in places subject to excessive humidity or dust.

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information

P.AE

Zoom in

Menu Screen Available Using The MENU Button (cont.)

makes additional recording functions possible.

... in places subject to soot or steam such as near

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio,

and precautions contained in the following pages to ensure safe use of this product.

: SEPIA

a cooking stove.

Connection to a TV or VCR equipped with an S-VIDEO

Select Dial

Basic Connections

VCR (Recording deck)

etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery

CHARGE indicator

DATE/TIME

... in places subject to excessive shock or

pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as

Using This Instruction Manual

vibration.

Use the provided Video and Audio cables.

usual from the beginning.

TAPE LENGTH

• All major sections and subsections are listed in the Table Of Contents (

... near a television set.

• Notes appear after most subsections. Be sure to read these as well.

... near appliances generating strong magnetic or

REC TIME

• Basic and advanced features/operation are separated for easier reference.

electric fields (speakers, broadcasting antennas,

SYMPTOM

etc.).

It is recommended that you . . .

INT. TIME

.... refer to the Index (

... in places subject to extremely high (over 40°C)

POWER

.... read thoroughly the Safety Precautions. They contain extremely important information regarding the safe

or extremely low (under 0°C) temperatures.

Lock hole

Display

use of this product.

MENU Button

3. DO NOT leave the unit . . .

TALLY LAMP

Battery holder

MENU Button

No power is supplied.

Display

SEPIA

LIGHT OFF/AUTO/ON Switch

REFRESH indicator

... in places of over 50°C.

Power Switch

(ex. Menu Screen available

EJECT Switch

You are recommended to carefully read the cautions on pages 53 and 54 before use.

... in places where humidity is extremely low.

Display

using the MENU Button)

Recording Start/Stop Button

SPORTS

(below 35%) or extremely high (above 80%).

JLIP ID NO.

Recording Start/Stop Button

REFRESH

... in direct sunlight.

SAFETY PRECAUTIONS

Power Switch

M . W . B .

The AC Power Adapter/Charger features a

ND :

AUTO

ND EFFECT

... in a closed car in summer.

Select Dial

D . ZOOM

DEMO MODE

REFRESH function that allows you to fully

TELE MACRO

... near a heater.

OFF

Power lamp

The power suddenly goes off and

DANGER

DATE TIME

PAUSE

discharge the battery pack before recharg-

FG :

FOG

4. To protect the unit, DO NOT . . .

Display

TAPE LENGTH

T45

does not come back on by itself.

ing.

n The video light can become extremely

WARNING:

... allow it to become wet.

REW (2) Button

Select Dial

REW

Approximate zoom ratio

Perform the REFRESH function after no less

hot. Do not touch it either while in

EJECT Switch

... drop the unit or strike it against hard objects.

TWILIGHT

PLAY

Select Dial

TO PREVENT FIRE OR SHOCK

Connector cover*

FOCUS

AUTO

RETURN

than 5 chargings.

operation or soon after turning it off,

... subject it to shock or excessive vibration during

Cassette Warning/

RM-V700U (provided with GR-FX40,

EXPOSURE

Display

IN/OUT

AUTO

Select Dial

otherwise serious injury may result.

HAZARD, DO NOT EXPOSE

WIDE

OFF

optional for GR-FX30/FX10)

RECORDING

Power lamp

transportation.

To discharge the battery . . .

Tape Remaining Time ..........................

S 1/2000

Picture stabilizer indicator

S.LX

OFF

Power Zoom Lever

Display

n Do not place the camcorder into the

... keep the lens directed at extremely bright

TITLE

.... attach the battery pack to the adapter as

When no cassette is inserted: the cassette (

THIS UNIT TO RAIN OR

RM-V700U (provided with GR-FX40,

DATE TIME DISP.

BACK

carrying case immediately after using the

Viewfinder

M . W . B .

AUTO

objects for long periods.

warning blinks.

NEGA/POSI

shown in the above illustration. Then

Display

Recording cannot be performed.

REC. TIME

OFF

MOISTURE.

optional for GR-FX30/FX10)

D . ZOOM

video light, since it remains extremely

INT. TIME

OFF

... direct the eyepiece of the viewfinder at the sun.

When the Erase Protection tab is not in the position

push REFRESH. The REFRESH indicator

TELE MACRO

OFF

M . W . B .

AUTO

TALLY LAMP

RETURN

hot for some time.

Tally lamp

VCR CODE LIST

DATE TIME

D . ZOOM

... carry it by holding the viewfinder. Be sure to

that allows recording: the cassette (

lights when discharging starts, and goes

JLIP ID NO

OFF

Connection to a TV or VCR equipped with an S-VIDEO

Connection For Tape Dubbing

TAPE LENGTH

T45

180 °

RM-V700U (provided with GR-FX40,

(lights while recording is in progress)

TELE MACRO

OFF

n When operating, keep a distance of

DEMO MODE

OFF

hold the main unit with both hands or use the

lights. Otherwise, the tape remaining time is

out when discharging is complete.

DATE TIME

VCR BRAND

optional for GR-FX30/FX10)

BUTTONS

Warning on lithium cell battery (for clock

about 30 cm. between the video light

TAPE LENGTH

DATE TIME DISP.

T45

grip.

displayed and the tape remaining time warning

0 : 00 : 25

NAME

(A) (B)

Use the provided Video and Audio cables.

operation and remote control unit)

and people or objects.

RETURN

... swing it excessively when using the shoulder

Recording does not start.

blinks when the tape is about to reach its end.

AUTO DATE

RETURN

M 0 : 12 : 34

AKAI

n Do not use near flammable or explosive

The battery used in this device may present a fire

DATE

strap.

When the Power Switch is set to "PLAY" and a

TIME

RETURN

or chemical burn hazard if mistreated. Do not

Battery pack remaining power indicator

materials.

DATE&TIME

tape is loaded: the cassette (

Buttons

OFF

: Factory-preset

REC TIME

recharge, disassemble, heat above 100°C or

PLAYBACK

n It is recommended that you consult your

BACK

displayed regardless of the Erase Protection tab's

Tape counter

REC. TIME

OFF

incinerate.

nearest JVC dealer for replacing the video

M.W.B.

OFF

Display

BLAUPUNKT

position.

INT. TIME

COUNTER

OFF

1/4S

Replace the battery with Maxell, Panasonic

PAUSE IN Connector

TALLY LAMP

TOTAL

light.

The tape is running, but there is no

AUTO

1/2S

EXIT

About moisture condensation . . .

Programme AE Indicator .................

JLIP ID NO

FERGUSON

(Matsushita Electric), Sanyo or Sony CR2025; use

: FINE

S ET

1 S

Infrared beam

playback picture.

DEMO MODE

OFF

: CLOUD

Displayed at

M 1 : 23 : 45

for approx. 2 seconds when

c You may have observed that pouring a cold

5 S

of another battery may present a risk of fire or

M . W . B .

AUTO

transmitting window

: HALOGEN

D . ZOOM

Programme AE with special effects is switched

liquid into a glass will cause drops of water to

explosion.

MWB

0 : 00 : 25

TELE MACRO

OFF

MBR SET Button

from one mode to another by pressing P.AE., then

n Dispose of used battery promptly.

form on the glass' outer surface. This same

0 : 03 : 18

RETURN

DATE TIME

FOCUS

AUTO

GRUNDIG

Playback picture is blurred or

EXIT

0 : 02 : 33

TAPE LENGTH

T45

only the indicator remains at

EXPOSURE

n Keep away from children.

AUTO

INT. TIME Button

phenomenon occurs on the head drum of a

0 : 04 : 11

interrupted.

WIDE

OFF

EXIT

TAPE END

n Do not disassemble and do not dispose of in

camcorder when it is moved from a cool

Fade/Wipe-Standby Indicator ..........

S.LX

OFF

REC TIME Button

INT. TIME

HITACHI

TITLE

fire.

place to a warm place, after heating a cold

Displayed at

for approx. 2 seconds when the

RETURN

DATE TIME DISP.

BACK

The counter indication is blurred

VOLUNE

FF Button

OFF

Power Switch Position

room, under extremely humid conditions or

P.AE Button

REC. TIME

Fade/Wipe is switched from one effect to another

15S

COUNTER

during Still playback.

INT. TIME

OFF

30S

Viewfinder indications

According to the Power Switch position you have selected, the following functions are available:

in a place directly subjected to the cool air

TOTAL

JVC

by pressing EFFECT, then only the indicator

TALLY LAMP

RETURN

CAUTIONS:

1 MIN

TAPE LENGTH

REW Button

JLIP ID NO

from an air conditioner.

remains at

TAPE TRANSPORT

5 MIN

DEMO MODE

OFF

AUTO

T30

n To prevent shock, do not open the cabinet. No

c Moisture on the head drum can cause severe

Tape Length Indicator ............................

T45

(Full Auto mode):

user serviceable parts inside. Refer servicing to

PAUSE Button

damage to the video tape, and can lead to

T60

The tape stops during fast-forward or

PAUSE

MITSUBISHI

Zoom Indicator Bar .............................

25. 12. 99

BATTERY RELEASE

EXIT

qualified personnel.

RETURN

internal damage to the camcorder itself.

rewind.

PLAY Button

Zoom Level Indicator

n When you are not using the AC Power

INT. TIME Menu

START/STOP Button

Approximate Zoom Ratio

NEC

Adapter/Charger for a long period of time, it is

AUTO DATE

Rewinding or fast-forwarding cannot

Normal Screen

Allows you to record using

recommended that you disconnect the power

Recording Indicator .............................

EXIT

VISS Button

Serious malfunctioning

be performed.

ATTENTION:

NO special effects or manual

PAUSE

cord from AC outlet.

Connector cover*

Picture Stabilizer Indicator ...................

25 . 12 . 99

PANASONIC

ZOOM (T/W) Buttons

adjustments. Suitable for

(DATE)

Before detaching the power source,

If malfunctioning occurs, stop using the unit

•Interval Timer/Recording Time

REW

standard recording.

VCR CTL Button

22 : 50 : 00

immediately and consult your local JVC dealer.

make sure that the camcorder's power

Indicator .....................................

M . W . B .

AUTO

15S

PLAY

(TIME)

A.DUB Button

D . ZOOM

NOTE:

•5 Sec. Rec Mode Indicator ................

is turned off. Failure to do so can result

TELE MACRO

OFF

25 . 12 . 99

STOP Button

DATE TIME

in a camcorder malfunction.

Instant Title Display .............................

No menu functions except "FOCUS" and

TAPE LENGTH

(DATE&TIME)

T60

* When connecting the cables, open this cover.

n Camcorder is designed exclusively for the VHS-C video cassette. Only cassettes marked VHS-C can be

Date/Time Display ...............................

"EXPOSURE" are available while in the Record

INSERT Button

RM-V700U (provided with GR-FX40,

OFF

used with this unit.

mode.

INT. TIME and REC TIME indications on the normal

R.A.EDIT Buttons

optional for GR-FX30/FX10)

(No indication)

Downloaded From VideoCamera-Manual.com Manuals

n HQ VHS is compatible with existing VHS equipment.

screen

RETURN

USING THE REMOTE CONTROL UNIT

PLAYBACK

USING THE REMOTE CONTROL UNIT

Slot

Marks

Power Switch

REW (2) Button

Remote sensor

After 2 sec.

To AC outlet

FF (3) Button

Allows you to set the current date and time (

30MIN

PLAY/PAUSE (4/6)

Button

P.AE

Allows you to set the tape length depending on the tape used (

REC

: SEPIA

This feature allows you to set the parameters for Animation and Time-Lapse

FADER

Zoom out

STOP (5) Button

recording (

pg. 33).

This feature allows you to set the parameters for Self-Timer (

LENS COVER

pgs. 50 – 52) and familiarize yourself with button locations, etc. before use.

Lapse recording (

To Video

Release tab

REFRESH switch

PAUSE

MENU Button

Output

OFF

15S

TAPE END

Zoom indicator bar

MERRY CHRISTMAS

This number is necessary when connecting the camcorder to a device such as a computer

REW (2) Button

MBR SET

using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 07.

Menu Screen 1

Zoom level indicator

FF (3) Button

Power Switch

VCR CTL

25. 12. 99

OFF

PLAY/PAUSE (4/6) Button

To Audio

Output

STOP (5) Button

Recording Start/Stop

PAUSE

Menu Screen

Button

Power Switch

CANCEL

FF (3) Button

COUNTER R/M Button

Power Switch

ON/OFF

Power Switch

Menu Screen 2

PLAY/PAUSE (4/6)

Menu Screen 1

Button

Menu Screen

Tape length indicator

T45

STOP (5) Button

Insert editing

) warning

OFF

indicator

(No indication)

VCR BRAND

BUTTONS

OUT

Power Switch

- - : - - : - -

NAME

COUNTER R/M Button

DATE/TIME DISP.

Tape Counter

PHILIPS

) mark is

With the camcorder's Power Switch set

Menu Screen 2

Setting Menu

to "CAMERA", "AUTO" or "PRO.".

Hook on.

(ex. REC TIME)

0 : 00 : 25

M.W.B. Menu

0 : 00 : 00

Remote sensor

Push in.

Tape running

Menu Screen

Transmits the beam signal.

indicator

OUT

4 :Playback

0 : 01 : 05

3 :Fast-Forward/

0 : 03 : 31

Forward Search

0 : 02 : 53

Self-Timer/Time-Lapse (

SANYO

- - : - - : - -

2 :Rewind/Reverse

Animation/Time-Lapse (

Set "POWER" to

REC TIME

6 :Still Playback

"CAMERA"

Power Switch

SELECO,

Retake (forward) (

OFF

("AUTO" or "PRO.")

1 4S

0 : 04 : 11

REX

0 : 01 : 13

1 2S

1 S

SHARP

Retake (rewind)/Quick Review (

TAPE LENGTH

To Video

5 S

Setting Menu

Output

SONY

EXIT

REC TIME Menu

Functions same as the Recording Start/Stop button on the camcorder.

START/STOP

Allows you to set various

THOMSON,

Ineffective

Power Switch

To Audio

recording functions using the

TELEFUNKEN,

Output

Zoom in/out (

INT. TIME indicator

menus. If you want more creative

SABA,

STOP

capabilities than full auto

NORDMENDE

pg. 32, 41

recording, try this mode.

INSERT

TOSHIBA

REC TIME indicator

22 : 50 : 00

INDEX

RECORDING

GETTING STARTED

RECORDING

PLAYBACK

Basic Connections And Tape Dubbing

Controls, Connectors And Indicators

Insert Editing

Self-Timer

White Balance Adjustment

Focusing

Random Assemble Editing [R.A.Edit]

Using Menu For Detailed Adjustment

SELECT SCENES

Tape Length Setting

Clock (Lithium) Battery Insertion/Remo

Power

Date/Time Insert

Grip Adjustment

NOTE:

Programme AE With Special Effects

For Your Maintenance

LOAD A CASSETTE

Still Playback

Zooming

Picture Stabilizer

Video Light (GR-FX40 only)

FEATURE:

You should already have performed the procedures listed

This camcorder's 3-way power supply system lets you choose

Slide EJECT to open the cassette holder, then insert

This camcorder is equipped with an easy-to-use,

The feature allows you to display the date and time in the

All you have to do to access any of the variety of shooting

Set the tape length according to the length of the tape

This battery is necessary for clock operation and to

You can record a new scene onto a previously recorded

A term that refers to the correctness of colour reproduction

You can set the delay between pressing the Recording

Create edited videos easily using your camcorder as

AUTO FOCUS

START SOURCE PLAYBACK

1. After Use

below. If not, do so before continuing.

the most appropriate source of power.

EXPAND LOOP

the cassette with the label facing out. Press PUSH to

on-screen menu system that simplifies many of the more

PURPOSE:

used.

perform date/time settings.

viewfinder, or on a connected colour monitor, as well as to

effects is press P.AE.

Start/Stop button and the actual start of recording. If you

tape, replacing a section of the original recording with

under various lighting. If the white balance is correct, all

the source player. You can select up to 8 "cuts" for

Press PLAY, then press ON/OFF on the remote

c Power (

pg. 4)

Set the Power Switch to "POWER OFF" to turn

Separate the Velcro strip.

The camcorder's Full Range AF system offers continuous

ensure the holder is closed and locked.

Installing The Battery

detailed camcorder settings.

record them manually or automatically.

NOTES:

minimal picture distortion at the in- and out-points. The

secure the camcorder, you (or whoever is operating the

other colours will be accurately reproduced.

To brighten the scene when natural lighting is too dim.

To compensate for unstable images caused by camera-

To produce the zoom in/out effect, or an instantaneous

automatic editing, in any order you like. R.A.Edit is

To pause during playback.

control. Make sure to point the remote control at the

c Tape Length Setting (

T45

off the camcorder.

shooting ability from close-up to infinity. However, correct

ACCESS MENU SCREEN

SWITCH OFF POWER

SELECT OPERATION MODE

original audio remains unchanged.

camcorder) can enter the scene before recording starts.

The white balance is usually adjusted automatically.

shake, particularly at high magnification.

change in image magnification.

more easily performed when the RM-V700U MBR

OPERATION:

camcorder's remote sensor.

c No function is available without power supply.

c Grip Adjustment (

SELECT MODE

INSERT HAND

The remote control uses one lithium battery

focus may not be obtainable in the situations listed below

SELECT OPERATION MODE

Close and lock the cassette holder by pressing

FINE 10

First set the Power Switch to "PRO.". Press

Switch off the unit's power and remove the power

SELECT OPERATION MODE

Set the Power Switch to "PRO.".

However, the more advanced camcorder operator would

(Multi-Brand Remote,

Digital circuitry extends the maximum magnification

c Use only the specified power supply.

OPERATION:

c Viewfinder Adjustment (

1) Set the LIGHT OFF/AUTO/ON Switch as required:

(CR2025).

NOTE:

1) Press PLAY/PAUSE (4/6) during playback.

Pass your right hand through the loop and grasp the

(in these cases use manual focusing):

PUSH.

Set the Power Switch to "PLAY". The power lamp

Turn the Power Switch to "PRO.".

supply unit (battery pack, AC Power Adapter/Battery

Set the Power Switch to "PRO.".

prefer to control this function manually and achieve a

offered by optical zoom. This system is called Digital

with your brand of VCR (see VCR CODE LIST), but

•The R.A. Edit counter display appears.

c Do not use provided power supply units with other

1) Press P. STABILIZER. "

2) To resume normal playback, press PLAY/PAUSE

grip.

: Turns off the light.

OFF

•When two subjects overlap in the same scene.

lights.

SELECT FUNCTION

SELECT MODE

Slide BATTERY RELEASE to remove the battery

Charger, etc.).

Use the RM-V700U remote control unit to perform this

Make sure the Power Switch is set to "PRO." and the

more professional colour/tint reproduction.

Zoom.

can also be performed by operating the VCR

equipment.

PULL OUT BATTERY HOLDER

LOAD A CASSETTE

To switch off the Picture Stabilizer, press

ACCESS MENU SCREEN

NORM

AUTO : Automatically turns on the light when the

(4/6) again.

•When illumination is low.*

ACCESS MENU SCREEN

pack.

Press P.AE to cycle through the modes as shown on

Rotate the Select Dial to move the highlight bar to

camcorder is in the Record-Standby mode before

procedure.

POSSIBLE CAUSE(S)

manually.

OPERATION:

P. STABILIZER. The indicator disappears.

Slide EJECT to open the cassette holder, then insert

ADJUST STRAP LENGTH

Menu access depends on the function you select.

: Pull out the battery holder while sliding

PLAY BACK

camcorder senses insufficient lighting on the

CHARGING THE BATTERY PACK

•When the subject has no contrast (difference in bright-

NOTE:

SELECT OPERATION MODE

REMOVE BATTERY HOLDER

the left.

"TAPE LENGTH", then press it. The TAPE LENGTH

Press the Select Dial to display the Menu Screen.

performing the following steps.

Press REW or FF to locate the beginning of the scene

Before operation, make sure the lithium battery is

Turn the LENS COVER Open/Close Ring to

the cassette with the label facing out. Press

Zoom In

Adjust so your thumb and fingers can easily operate

If you select the functions from the "Menu Screen

subject.

ness and darkness), such as a flat, one-colour wall, or a

NOTES:

Press PLAY/PAUSE (4/6). The playback picture

pg. 32, 33).

SELECT OPERATION MODE

Pull out the battery holder.

Setting Menu appears.

Set the Power Switch to "PRO.".

Noise bars appear and pictures may become

you want, then press IN/OUT to register that point.

installed in the remote control RM-V700U

close the lens cover.

20X

Push the Power Zoom Lever towards "

ensure the holder is closed and locked.

Video cable (provided)

: Pinch the release tab and pull out the

the Recording Start/Stop Button and Power Zoom

Available Using The Select Dial" described on

: Always keeps the light on as long as the

•The selected mode's name and its indication are

clear, blue sky.*

appears.

ACCESS MENU SCREEN

SUPPLY POWER

ACCESS "DATE/TIME DISP." MENU

c Accurate stabilisation may not be possible if hand

Set the Power Switch to "PLAY".

monochrome during Still Playback. This is normal.

(

pg. 40).

The tally lamp remains off at all times.

2. Cleaning The Camcorder

Lever. Refasten the Velcro strip.

pg. 25 . . .

INDEX

camcorder is turned on.

Zoom Out

displayed for approx. 2 seconds. Then the name

•When a dark object is barely visible in the viewfinder.*

SET TAPE LENGTH

INSERT BATTERY IN HOLDER

Connect the charger's AC power cord to a wall outlet.

ACCESS MENU SCREEN

•The data appears under "IN" on the display.

c The battery pack has not been attached correctly

shake is excessive, or under the following condi-

Move the highlight bar to "DATE/TIME DISP." by

Press MENU.

ENTER RECORD-STANDBY MODE

.... press the Select Dial. The Menu Screen appears.

CLEAN EXTERIOR

STOP PLAYBACK

Push the Power Zoom Lever towards "

disappears, and only the indication remains. The

•When the scene contains minute patterns or identical

FIND EDIT-OUT POINT

The video light can only be used with the

The tally lamp comes on to signal the start of recording.

(

pg. 4).

tions:

Rotate the Select Dial to move the highlight bar to the

Insert the battery in the holder, and be sure to have

rotating the Select Dial while in Record-Standby.

Press MENU. The Menu Screen appears.

SET REMOTE/VCR CODE

Shuttle Search

FEATURE:

INSERT BATTERY IN HOLDER

Turn the LENS COVER Open/Close Ring to open the

Wipe gently with a soft cloth.

The quicker you push the Power Zoom Lever, the

ATTACH BATTERY PACK

If you select the functions from the "Menu Screen

Press STOP (5).

mode is activated.

patterns that are regularly repeated.

ACCESS "INT. TIME" MENU

To AUDIO and

camcorder's power on.

c The battery pack is not charged (

• When shooting subjects with vertical or horizontal

the "+" mark visible.

correct setting. T30 = 30 minutes of recording time,

Then press it to display the DATE/TIME DISP. Menu.

Play back the tape, locate the point and press PAUSE

lens cover, then set the Power Switch to "CAMERA"

Insert the battery in the holder, and be sure to

Put cloth in diluted mild soap and wring it well

Available Using The MENU Button" described on

Align the marks and slide the battery pack in the

VIDEO IN connectors

quicker the zoom action.

•When the scene is affected by sunbeams or light

ACCESS WHITE BALANCE

It is recommended to set the white balance

Press REW or FF to locate the end of the scene and

c The power supply has not been correctly connected

T45 = 45 minutes, and T60 = 60 minutes.

stripes.

Rotate the Select Dial to move the highlight bar to

on the camcorder or the remote control.

SET REMOTE TO OPERATE VCR

PURPOSE:

NOTES:

("AUTO" or "PRO.").

have the "+" mark visible.

pg. 25 and 26 . . .

direction of the arrow until it locks in place.

to wipe off heavy dirt, then wipe again with a

reflecting off the surface of a body of water.

(

press IN/OUT to register it.

SELECT THE DESIRED MODE

RE-INSERT HOLDER

pg. 30) to

• When shooting dark or dim subjects.

ADJUSTMENT

(

pg. 5).

NOTES:

"NEXT" in Menu Screen 1 and press it to display

Turn off the power to the VCR and point the

To allow high-speed search in either direction.

.... press MENU. The Menu Screen appears.

Rewind or Fast-Forward the tape

dry cloth.

c Only one mode can be engaged at a time.

•If you decide you want to return the tape length to

RESET COUNTER

•When shooting a scene with a high-contrast background.

22 : 50 : 00

When not using the video light, turn it off to save

Move the highlight bar to the desired mode by

Slide the holder back into the slot until you hear a

• When shooting subjects with excessive

Automatic demonstration will not take place.

Menu Screen 2. Then, move the highlight bar to "INT.

c Focusing may become unstable during Zooming. In

Move the highlight bar to "M.W.B." by rotating the

•The power lamp lights and the camcorder enters the

remote towards the VCR's infrared sensor. Then,

RE-INSERT HOLDER

• The CHARGE indicator begins blinking to indicate

•The data appears under "OUT" on the display.

OPERATION:

c The screen becomes slightly reddish when the Fade/

the previous setting, rotate the Select Dial to move

CLEAN LENS

battery power.

c The battery pack has completely discharged.

rotating the Select Dial, then press it. The desired

click.

Audio cable (provided)

Press and hold COUNTER R/M for more than

backlighting.

TIME" and press it.

* The low-contrast warning "

this case, set the zoom while in Record–Standby,

Select Dial, then press it. The Menu Screen disap-

SELECT FUNCTION

charging has started.

Record-Standby mode.

referring to the VCR CODE LIST on the left,

Slide the holder back in until you hear a click.

Demonstrates certain functions such as Fade/Wipe, etc. When

Press REW (2) to rewind, or FF (3) to fast-forward the

•The total time of the registered scene(s) is displayed

Wipe (

the highlight bar to "EXIT".

pg. 19) is used in the Sepia mode.

Blow it with a blower brush, then wipe it gently

1) Press FF (3) to search forward or press REW (2)

c Remove the cassette and disconnect the power source, then

mode is activated.

• When shooting scenes with movement in various

1 second to reset the tape counter, then press again

lock the focus by using the manual focus

pears and the "M.W.B." Menu appears.

NOTES:

•The scene you are aimed at appears on the

Rotate the Select Dial to place the highlight bar on

press and hold MBR SET, and press button (A)

NOTES:

"DEMO MODE" is set to "ON" and the Menu Screen is closed,

tape during Stop mode.

at the bottom of the screen.

NOTES:

c The screen becomes slightly dark in the High Speed

Viewfinder Adjustment

SET INTERVAL TIME

with lens cleaning paper.

to reverse during playback.

after a few minutes, try turning the power back on. If it still

for less than 1 second so that "M" appears.

directions.

DETACH BATTERY PACK

(

pg. 29), then zoom in or out in Record mode.

the desired function.

viewfinder screen, with the word "PAUSE"

and then (B).

•Read the caution concerning lithium batteries

c Even if the battery indicator (

the demonstration starts.

CLOSE MENU SCREEN

•You should have already performed the Date/Time

If your TV/VCR has the SCART connector,

Shutter mode. Use in well-lit situations.

c The rating plate (serial number plate) and safety

c See "SAFETY PRECAUTIONS" (

SET FUNCTION PARAMETERS

does not come on, consult your nearest JVC dealer.

2) To resume normal playback, press PLAY/PAUSE

REMOVE EYEPIECE

• When shooting scenes with low-contrast back-

c If the lens is smeared or blurred, accurate focusing is not

Rotate the Select Dial to move the highlight bar to the

When the CHARGE indicator stops blinking but stays lit,

NOTES:

c The zoom level indicator (

superimposed upon it.

(

the battery pack's charge is low, the camcorder may

use the provided cable adapter.

Press the Select Dial. The Menu Screen reappears

Setting procedure (

Battery Pack Remaining Power Indicator

c In the "High Speed Shutter" or "Sports" modes, picture

FIND EDIT-IN POINT

•To go from Menu Screen 1 to Menu Screen 2, rotate the

caution are on the bottom and/or the back of

on safe handling of lithium batteries.

NOTES:

(4/6).

charging is finished. Slide the battery pack opposite the

Turn the eyepiece counterclockwise and pull it

desired time, then press it. The Menu Screen

grounds.

•The code is automatically set once you release

possible. Keep the lens clean, wiping with a piece of soft

Move the highlight bar to the required white balance

Once the zoom level indicator reaches the top of

SELECT OPERATION MODE

turn off automatically when you turn on the video

c The camcorder shuts off automatically after about 5

Repeat steps 5 and 6 for each additional scene

Select Dial to "NEXT" and press it. To go back to Menu

pg. 13

with the highlight bar on "RETURN". Press the Select

first.

Changes as follows according to the battery

colour may be adversely affected if the subject is lit by

the main unit.

direction of the arrow.

c To avoid losing the battery and/or battery holder, place

c When a tape whose Erase Protection tab is in the position that

Press REW to go a little beyond the beginning of the

out.

c Switch off the Picture Stabilizer when recording

reappears with the highlight bar on "RETURN".

cloth if it gets dirty. When condensation occurs, wipe

MBR SET, and the VCR's power comes on.

by rotating the Select Dial.

START SHOOTING

NOTES:

the zoom indicator bar, all magnification from that

Set the Power Switch to "CAMERA" ("AUTO" or

light, or when you start recording with the video light

Screen 1 from Menu Screen 2, rotate the Select Dial to

minutes in Stop mode. To turn on again, set the Power

(as many as 8).

)

Dial again to close the Menu Screen.

c The rating plate (serial number plate) of the AC

pack's remaining power level:

alternating discharge-type light sources such as

the camcorder with the grip side up as shown in the

allows recording is loaded in the camcorder, demonstration is

scene you want to replace, press PLAY to view the

with the camcorder on a tripod.

with a soft cloth or wait for it to dry naturally.

CLEAN VIEWFINDER

point is through digital processing.

Press the Recording Start/Stop Button.

"PRO.").

c During playback, press and hold REW ( 2 ) or

"BACK", and press it.

turned on.

Switch to "POWER OFF", then to "PLAY".

CLOSE MENU SCREEN

Power Adapter/Charger is on its bottom.

flourescent or mercury-vapour lights.

CLOSE MENU SCREEN

c Make sure the Erase Protection tab is in the position that

OPERATE VCR

"AUTO"

illustration when inserting/removing the battery.

not available.

recorded tape, and press PAUSE exactly at the

c The "

" indicator appears blinking if the

c When shooting a subject close to the lens, zoom out first

Battery pack

•If the setting you want cannot be found in the Menu

Remove dust using a blower brush.

c When using Digital Zoom, the quality of image may

NOTE:

c When the

FF ( 3 ). The search continues as long as you hold

MAKE CORRECTIONS (IF NECESSARY)

LIGHT OFF/AUTO/ON Switch is set to

c If a blank portion on the tape is played back, the screen

The Menu Screen reappears with the highlight bar on

almost gone, the indicator "

allows recording. If not, slide the tab. Some cassettes have

The white balance is adjusted automatically. This is

c By turning off the camcorder or inserting a tape whose Erase

Press the Select Dial.

point where the new scene should start.

Screen, place the highlight bar on "RETURN", then go

Stabilizer cannot be used.

•"

" appears in the viewfinder while recording is

Make sure the VCR's power is on. Then, while

(

POSITION VIEWFINDER

pg. 14). If zoomed in in the auto focus mode, the

suffer. To deactivate Digital Zoom, set "D.ZOOM"

RE-ATTACH EYEPIECE

the button. Once you release it, normal playback

"AUTO":

BN-V12U

may become black. This is not a malfunction.

Press CANCEL during steps 5 and 6 to erase the most

approx. 1 hr. 10 min.

"RETURN". Then press the Select Dial to close the

The tape remaining time (

power warning), then the unit shuts off. Replace

removable tabs. If the tab has been removed, cover the

to step 6.

the factory preset position.

Protection tab is in the position that allows recording into it,

in progress.

holding VCR CTL, press the button on the

camcorder could automatically zoom out depending on

to "OFF" in the Menu Screen (

Adjust the viewfinder manually for best viewability

Re-attach the eyepiece and turn it clockwise.

resumes.

• Depending on the lighting conditions, the video

This camcorder is designed to be used with

recently registered point.

Menu Screen.

viewfinder is correct only if the correct tape length has

the battery pack with a fully charged one.

ENGAGE INSERT EDITING MODE

START DELAYED RECORDING

hole with adhesive tape.

"DEMO MODE" is set to "OFF" automatically.

remote for the desired function. The functions

BN-V20U

approx. 1 hr. 50 min

the distance between the camcorder and the subject.

(see illustration on left).

: FINE "

c Noise bars appear and pictures may become

light may keep turning on and off. In this case,

PAL-type colour television signals. It cannot be

MAKE SETTING

been selected.

Note: The symbol containing 3 darkened squares —

NOTES:

(A) (B)

Press and hold INSERT, and without releasing

Press the Recording Start/Stop Button. When the

c During the demonstration, all functions except zoom are

the remote can control are PLAY, STOP, PAUSE,

NOTES:

When Tele Macro (

When shooting outdoors on a sunny day.

NOTES:

monochrome or darken during Shuttle Search. This

used for playback with a television of a different

manually switch the light on or off using the

Press the Select Dial. The setting procedure depends

c The camcorder Power Switch has not been set to

— does not necessarily mean that the battery

selected time has elapsed, recording begins auto-

INSERT, press and release PAUSE. The Insert Editing

disabled.

FF, REW and VCR REC STBY (you do not need

camcorder will not zoom out automatically.

ADJUST DIOPTRE

c Avoid using strong cleaning agents such as benzine

standard. However, live recording and

is normal.

LIGHT OFF/AUTO/ON switch.

on the function you select.

c There must be at least one second between an in-point

: CLOUD"

Functions

"CAMERA" ("AUTO" or "PRO.".) (

pack is fully charged.

USING THE BATTERY PACK

matically.

mode is engaged. When the scene the camcorder is

DISPLAY

to press VCR CTL for this one).

Turn the Diopter Adjustment Control until the

viewfinder playback are possible anywhere. Use

or alcohol.

• While the "Sports" or "High Speed Shutter" mode

and its corresponding out-point.

When shooting outdoors on a cloudy day.

If you select "FOCUS", "EXPOSURE", "TITLE",

Focus Indicator ....................................

aimed at appears on the screen, go to the next step.

c The selected display can be recorded.

the BN-V12U/V20U battery packs and, to

indications in the viewfinder are clearly focused.

c Cleaning should be done only after the battery pack

Counter Memory Function

(

pg. 21) is engaged, the light is likely to stay on.

You are now ready to try Random Assemble

FEATURE:

"DATE/TIME DISP." or "DATE/ TIME" . . .

c To ensure correct operation, there should be at least

: HALOGEN "

To Cancel Self-Timer . . .

ATTACH BATTERY PACK

c If you do not want to record the display, select the OFF

Exposure Control Level Counter ...........

recharge them, the provided multi-voltage AC

has been removed or other power units have been

• While the "Twilight" mode (

Editing.

.... see respective pages (FOCUS:

15 seconds between an out-point and the next in-point.

BEGIN INSERT EDITING

When using a video light or other similar type of

.... Before the recording begins, press the Recording Start/

Hook its end to the camcorder (

mode before shooting.

Power Adapter/Charger. (An appropriate

—

White Balance Mode Indicator ............

disconnected.

EXPOSURE:

the light will not activate.

PURPOSE:

c The TV has not been set to its VIDEO mode or channel.

c Blank portions of a tape cannot be registered as in-points

lighting.

pg. 20

Stop Button to display "

pack in until it locks in place (

Press START/STOP. When the counter reaches

conversion adapter may be necessary to

IMPORTANT

DATE/TIME DISP.:

c Mould may form if the lens is left dirty.

AUTO DATE

•Record–Standby Mode Indicator .......

c If A/V connection is used, the TV's VIDEO/TV Switch has

or out-points.

To make it easier to locate a specific tape segment.

TIME" in the Menu Screen to "OFF".

"0:00:00", editing stops automatically and the

accommodate different designs of AC outlets in

Power Switch

"MWB"

If you select "WIDE", "D.ZOOM", "TELE MACRO"

c When using a cleaner or chemically treated cloth,

•Lens Cover Warning:

c Your camcorder automatically records the date for about

not been set to VIDEO.

c If it takes more than 5 minutes to search for an in-point,

DETACH BATTERY PACK

Although the MBR is compatible with JVC VCRs and

OPERATION:

camcorder enters the Insert-Pause mode.

different countries.)

When shooting with the white balance already

or "DEMO MODE" . . .

refer to the cautions that came with it.

LENS COVER ....................................

5 seconds after recording is initiated in the following

the VCR's Record-Pause mode is cancelled and editing

—

those of many other makers, it may not work with

Slide BATTERY RELEASE and pull out the battery pack.

1) Press COUNTER R/M and hold for more than 1

having been set on the subject (

.... the selected function's parameter starts blinking.

c When removing the eyepiece, be sure to hold the

c The video heads are dirty or worn out. Consult your nearest

situations:

does not take place.

Clock Battery Warning

END INSERT EDITING

yours or may offer limited functions.

pg. 41)

Rotate the Select Dial until the desired parameter

second. The counter resets to "0:00:00".

viewfinder securely.

PLAY/PAUSE (4/6) Button

JVC dealer for head cleaning or replacement.

• After changing the date.

Blinks for approx. 10 seconds when the power is

c Pressing ON/OFF clears all in- and out-points from

Crossed Out Dust Bin Mark

Press STOP.

CLOSE MENU SCREEN

appears. Go to step

pg. 19

Approximate recording time (unit: min.)

NOTES:

2) Press COUNTER R/M for less than 1 second. "M"

pg. 41)

• After loading a cassette.

turned on. This display also blinks when the clock

memory.

If you select "JLIP ID NO." . . .

Press the Select Dial. The Menu Screen reappears

appears.

c This is normal.

• After Auto Date Record mode is selected by rotating

(lithium) battery is either not installed or has

pg. 15)

c Leave a small margin for error around each in-point to

c If the VCR's power does not come on in step 1, try

Battery pack

.... press the Select Dial so that the number blinks, then

with the highlight bar on "RETURN". Press the Select

3) After recording or playback, press STOP (5), then

NOTES:

the Select Dial.

discharged. Install or replace the old battery with

ensure the scene is recorded in its entirety.

another code from the VCR CODE LIST.

rotate it until the desired number appears, and press

Dial again to close the Menu Screen.

REW (2). The tape automatically stops at or close

BN-V12U

c In this mode, the date is replaced after 5 seconds with

c Turning off the camcorder's power erases all registered

a new one (

c Some brands of VCR do not come on

it. Then rotate the Select Dial to move the highlight

c After step 5, Retake (

pg. 15)

to 0:00:00.

"AUTO DATE" but this is not recorded.

in- and out-points.

bar to "EXIT".

automatically. In this case, turn the power on

PRO.

• Tape End Display: TAPE END ............

Video cable (provided)

c The tape may stop slightly before or after the designated

BN-V20U

To Return To Automatic White Balance . . .

pg. 8

4) Press PLAY/PAUSE (4/6) to start playback.

manually and try step 2.

(PRO. mode):

If you select any other functions . . .

Appears when the end of the tape is reached

end point, and noise bars may appear. Neither indicates

—

.... select "AUTO" in step 4. Or set the Power Switch to

c The Counter Memory Function has been activated

pg. 14

.... rotate the Select Dial to move the highlight bar to the

NOTES:

c If the remote control is not able to control the VCR,

( ) : when the video light is on (GR-FX40 only).

during playback, recording or fast-forward.

a defect in the unit.

To AUDIO and

"AUTO".

—

(

pg. 36).

desired setting.

use the controls on the VCR.

• Condensation Warning:

VIDEO IN connectors

c The counter memory functions in the Fast-Forward

c Only the video signal is recorded in the Insert Editing

INFORMATION:

• If you decide you want to return to the previous

NOTE:

c When the remote control's battery runs out, the

When this indication appears, all functions

mode.

and Rewind modes.

c The tape is already fully wound on one reel or the other.

setting, rotate the Select Dial to move the highlight

VU-V856KIT is a set composed of the BN-V856U battery pack

VCR brand you have set will be erased.

pg. 12

except tape eject and power on/off are disabled.

c To disable the Counter Memory Function, press

Audio cable (provided)

White balance cannot be used when Sepia (

bar to "EXIT".

and AA-V80EG AC Power Adapter/Charger.

In that case, replace the old battery with a new one

Turn the unit off (without removing the power

pg. 16

COUNTER R/M for less than 1 second so that "M"

activated.

pg. 14)

The BN-V856U battery pack provides approx. 7 hours of

and reset the VCR brand.

source) for a few hours, and when you turn it on

END SETTING

disappears.

recording time when the video light is off. Also read

If your TV/VCR has the SCART connector,

—

This unit is produced to comply with Standard

again the indication should disappear.

Press the Select Dial. The Menu Screen reappears

thoroughly the VU-V856KIT's instruction manuals.

use the provided cable adapter.

IEC Publ. 65.

• Head Clog Warning:

with the highlight bar on "RETURN".

—

pg. 17

It is impossible to charge the BN-V856U battery pack using

Appears if dirty heads are detected during

the provided AC Power Adapter/Charger. Use the optional

)

—

pg. 23

CLOSE MENU SCREEN

recording. In such a case, use the optional

AA-V80EG AC Power Adapter/Charger.

pg. 22

—

Press the Select Dial. The normal screen reappears.

Cleaning Cassette. If, after using it, the problems

—

still exist, consult your nearest JVC dealer.

TROUBLESHOOTING

GETTING STARTED

CAUTIONS

INDEX

Advanced Features (cont.)

Features (cont.)

Basic Playback

Advanced Features (cont.)

Advanced Features

Advanced Features (cont.)

Basic Features (cont.)

Basic Recording

Basic Features

pg. 7).

pg. 8)

pg. 10)

pg. 8).

pg. 40) is set to operate

pg. 3).

pg. 10)

"appears.

pg. 32) and Time-

the lock hole.

battery holder.

pg. 4).

To TV or VCR

when you use the video light.

" appears.

4 5 6

) does not blink if

pg. 2) for information

5 ) moves during zoom.

pg. 2).

pg. 7). If you haven't, do so

". When the power is

Charging time

approx. 3 hrs. 30 min.

pg. 13) displayed in the

pg. 25).

approx. 6 hrs. 40 min.

pg. 25) is activated, the

pg. 12).

With the camcorder's Power Switch set

to "PLAY".

pg. 21) is engaged,

) and push the battery

pg. 43

pg. 27, TITLE:

) .

pg. 22, DATE/TIME:

pg. 42

—

n The Crossed Out Dust Bin

Fast-Forward, Forward Shuttle Search

GR-FX40

GR-FX30

Mark on the battery pack

(

pg. 34, 36)

indicates that the product

75 (40)

pg. 6).

Rewind, Reverse Shuttle Search

pg. 15) can be performed.

complies with Directives

(

pg. 34, 36)

POWER OFF:

91/157/EEC and 93/86/EEC.

115 (70)

115

n Nickel-Cadmium (Ni-Cd)

Pause (

pg. 36)

battery pack must be

Playback start (

VCR (Recording deck)

pg. 34)

recycled or disposed of

properly.

Allows you to switch off the

camcorder.

—

pg. 42

Audio dubbing (

pg. 47)

Stop (

pg. 34)

Insert Editing (

pg. 46)

pg. 44

Indications

(cont.)

MENU.

PUSH to

T".

W".

VCR

Discharging time

" blinks (battery

pg. 29

pg. 27

pg. 28, 29,

pg. 30

pg. 23,

", then set "INT.

pg. 7).

pg. 12

pg. 13

pg. 31).

(

GR-FX10

pg. 13

115

pg. 21) is

This manual is also suitable for:

Gr-fx30 Gr-fx10

JVC GR-FX40 Instructions Manual page 32

Related Manuals for JVC GR-FX40

Related Products for JVC GR-FX40

This manual is also suitable for: