9 Place refrigerator flatwise, remove
part ③ and then loose screws ④.
Remove part ② and part ①.
Lower Hinge Part
Front Foot Fixed Board
Adjustable Bottom Feet
Part Self-tapping Screws
10 Screw out lower hinge, change it to
the near hole site, and then screw up
and mount washer.
11 Just remount to the step 9, change
part ① to left and part ② to right and
then fix them with screws ④. Finally
install part ③.
12 Move the lower door and adjust its
position to align lower hole site and
upper hinge axis. Turn the middle
hinge by 180 degrees, change the
washer on the axis to the upper
side, adjust the middle hinge to the
appropriate position and then install
Washer may stick to
Reversing the Door
13 Screw out the upper hinge axis, turn
stick to the
14 Exchange wires both in the left and
15 Move the upper door to appropriate
the upper hinge over and fix axis on
it. Then place it at side for use.
right slots of refrigerator body.
position, adjust part ① and upper
door, then fix part ① by screws ②.
(Please hold upper door by hand