Summary of Contents for Oreck HEATWISE HW1000P
- Page 1 User’s Guide Important! Read this manual carefully, and keep for future reference. Heatwise MODELS: Heatwise HW1500W ™ Heatwise HW1500P ™ Heatwise HW1000P ™ Heater ™ ®...
- Page 2 On the web, point and click at: www.oreck.com or visit www.oreck.com and click locate a store on the top right. Visit Oreck in person at one of over 450 store locations. To find the nearest store, please call 888•oreck store (1 •...
-
Page 3: Table Of Contents
General Warnings Features ....... . . 3 Operation....... . . 4 Power On/Off . -
Page 4: Safety
General Warnings IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THE HEATER • DO NOT plug heater into any other cord connected device such as a power strip, surge protector, multiple outlet adapter, grounding adapter, outlet-type air fresheners or extension cords. Plug into a 3-prong 124V 15 amp or higher grounded circuit receptacle only. - Page 5 • Heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handle when moving this heater. • DO NOT operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
-
Page 6: Features
1. LED Display: Large display showing desired temp and delay start function. 2. Control Panel: Easy-to-push buttons control: power, time, and temp. 3. Cabinet: Wood: 3/4 ply - Tuscan walnut finish. Plastic: ABS 94-VO fire retardant plastic 4. Caster Wheels: Free floating for easy relocation. 5. -
Page 7: Operation
Turning Power On 1. Press the Power button on the left side of the Control Panel. The heater’s quartz heating elements will light up inside the heater. 2. After a few minutes, once the air within the heater is warm, the heater fan (some models have 2) will begin to operate. -
Page 8: Fahrenheit/Celsius
3 seconds. The display will update automatically. Suggestions for Best Performance To assure maximum performance of your Oreck Heatwise™ Infrared Heater, please review the following recommendations: • Do not locate the heater in an area with a high air exchange rate in and out of the room. - Page 9 cold air return. This will alow for more efficient heating. Experiment with the placement of the heater to see what works best for you. • To ensure maximum efficiency, a 30% minimum relative humidity should be maintained in the heated environment. •...
-
Page 10: Maintenance
The only maintenance that is required for the heater is the periodic cleaning of the heater’s electrostatic filter (located at the back of the unit). This cleaning should be performed at least once a month, or earlier as dust becomes visible on the filter, to ensure efficient operation of the heater. - Page 11 Storage When the heater is not being used for an extended period of time, observe the following steps to preserve the life and per- formance of the unit: • Unplug heater (Do not unplug heater while heater is running). • Gently wrap the power cord into the cord storage compartment in the back of your heater.
-
Page 12: Troubleshooting
Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. shooting All other servicing should be done by an Oreck authorized service center. Problem The heater’s airflow has been... -
Page 13: Warranty
God, the use of voltages other than on the data plate of this product or service of this product by other than Oreck or a participating Factory Authorized Service Center. - Page 16 © 2009 Oreck Holdings, LLC. All rights reserved. All marks, text, logo’s, product configura- tions and registered trademarks are owned and used under the authority of Oreck Holdings, LLC 21085-01 REV A 07/09 ECN # R-9474...