Features - Oreck ProShield Air Purifier User Manual

Features

1. Pre-Filter: Filter large particles such as dust, hair and lint.
2. Cleaning brush: Use to clean the front and back grilles.
Stores snuggly in the compartment under the cover.
3. Odor Absorber: Reduces odors and chemical fumes from
glue, solvents and synthetic materials. The air purifier
continues to filter particles from the air passing through it
with or without the odor absorber. Note: Oreck ProShield
Air Purifier has a replaceable odor absorber. Oreck
ProShield Plus Air Purifier has a permanent odor absorber
which is activated by internal ultraviolet lights and cannot
be removed.
4. Truman Cell: Electrostatically charges and collects
small particles such as dust, smoke, pollen, bacteria,
molds, viruses, and fungi.
5. Catalytic Oxygenator: Both models contain a permanent
catalytic Oxygenator which cannot be removed.
6. Exhaust Grille: Directs the flow of air as it exits the unit.
7. Power Cord: Plug into the outlet to begin use.
8. Removable Base: Allows the air purifier to stand vertically.
Simply stand the unit on its base with the Oreck logo facing
front and the control panel buttons at the top.
9. Night Light: The right end of both models will softly glow
when the night light is activated. On the Oreck ProShield
Plus Air Purifier, the logo will illuminate when the unit is
sitting on its base, or serve as a night light on the front of
the unit.
10. Cover Release Button: Press in to release the cover for
maintenance access.
11. Truman Collector Cell Light: A solid red light is included
as a handy reminder to clean the Truman Cell after 30 days.
A blinking light indicates a malfunction that has caused the
Truman cell to shut down and requires attention.
12. Speed Indicator Light: Lighting starts from the center
for the lowest motor speed to all five lights for full motor
speed.
13. Odor Absorber Light: The light indicates that it is time to
replace the odor absorber.
14. Oreck ProShield Air Purifier: On this model, this button
activates the Air Revitalizer feature which is designed
to run continuously, but may be turned OFF if desired.
Provides additional air freshness via the release of negative
ions, which can also cause dust particles to clump together
and fall out of the air passing through the air purifier. You
may notice faster dust buildup on the unit and surrounding
objects with the Air Revitalizer turned ON.
3