Troubleshooting - Oreck ProShield Air Purifier User Manual

Trouble-
shooting
Problem
Unit does not
turn ON
Truman Cell
light has turned
solid red.
Truman cell
light is
blinking red
Unit does
not remove
pollutants.
Unit sparks,
crackles and
pops.
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing this guide.
All other servicing should be done by an Oreck authorized
service center.
Check
• Power Cord
• Selector Switch
• Top Cover
Truman Cell
Truman Cell
Truman Cell
Truman Cell
11
• Plug in Power Cord
• Set Selector Switch for desired blower
speed.
• Make sure the top cover is securely closed
• A solid red light is a 30 day cleaning
reminder. Wash Collector Cell. Make sure
it is thoroughly clean and dry before
reinstalling.
• A blinking red indicates the power supply
has shut down due to arcing or short
circuit. The cell should be inspected and
cleaned, repaired, or replaced.
• Clean the Truman Cell and make sure it is
completely dry before reinstalling.
• Truman cell may be damaged. Contact
Oreck for service.
• Sparking or popping noise (arcing) can
occur when a large particle is captured
in the Truman Cell. If the unit is arcing
excessively, the cell may be dirty. Try
cleaning the Truman Cell.
• If excessive arcing continues after
proper cleaning, the Truman Cell may
be damaged or wet. If damaged, contact
Oreck for service.
Solution