Table of Contents
Advertisement
VERY IMPORTANT: PLEASE
The RamPak Utilities work with ProDOS 16 or
ProDOS 8, but they will
your Apple IIGS switches between ProDOS 16 and
ProDOS 8. Separate RamPak utilities for both
ProDOS 16 and ProDOS 8 are provided on the
Utilities disk. The ProDOS 8 version of the RamPak
Utilities is named "Cache.System" and the
ProDOS 16 version of the utilities is named
"Cache." You must install the appropriate Rampak
utility file on each startup disk, depending on whether
your program is a ProDOS 16 or ProDOS 8
application. You should check the owner's manual
of the application if you are not certain whether the
program operates under ProDOS 8 or ProDOS 16.
If you wish to continue to use your cache after
switching operating systems, you will be required to
reboot the Apple IIGS using the disk on which you
have installed the appropriate RamPak Utilities.
Orange Micro will release an updated version of
the ProDOS 16 utilities when ProDOS 16 2.0
becomes available. Please contact your dealer to
obtain an update at that time.
Installing the Utilities on a ProDos 16 System
Disk:
The RamPak Utilities can be installed on any ProDos
16 system disk. Using the Apple IIGS Desktop or your
own copy utility, copy the file "Cache" from the RamPak
Utilities disk to the "System.Setup" directory of any
ProDos 16 system disk. The path to the "System.Setup"
directory
system.setup". (Insert the actual name of your disk in
place of "Name-of-your disk.")
READ CAREFULLY:
is
"/Name-of-your
remain resident when
not
9
Disk/system/
Advertisement
Table of Contents
