Cleaning And Maintenance; Replacing The Filters; Protecting The Environment - Black & Decker Dustbuster NW36XXY Original Instructions Manual

ENGLISH
Wet pick-up (fig. A)
Use the wet pick-up accessory (4) on
non-absorbent surfaces.
For best results when using this
accessory, hold the appliance at an angle
of 45° and pull it slowly towards you.
On absorbent surfaces, such as carpet,
your appliance will pick up wet spills
better without the accessory.

Cleaning and maintenance

Warning! Regularly clean the filters.
Cleaning the dust bowl and filters
(fig. F & G)
The filters are re-usable and should be
cleaned regularly.
Remove the dust bowl (2) by turning
u
counterclockwise.
Empty the dust bowl.
u
Remove the filters (5 & 6).
u
Wash the filters in warm, soapy
u
water. The bowl can also be washed
if necessary. Do not immerse the
appliance in water.
Make sure the dust bowl and filters
u
are dry.
Refit the filters (5 & 6).
u
Refit the dust bowl onto the
u
appliance. Make sure the dust bowl
clicks into place.
Warning! Never use the appliance
without the filters. Optimum dust
collection will only be achieved with clean
filters and an empty dust bowl.
Replacing the filters
The filters should be replaced every
6 to 9 months and whenever worn or
damaged. Replacement filters are
available from your Black & Decker
dealer (catalogue number: WVF60).
Remove the old filters as described
u
above.
Fit the new filters as described above.
u

Protecting the environment

Z
Separate collection. This product
must not be disposed of with
normal household waste.
8
Should you find one day that your
Black & Decker product needs
replacement, or if it is of no further use to
you, do not dispose of it with household
waste. Make this product available for
z separate collection.
Separate collection of used
products and packaging allows
materials to be recycled and
used again. Re-use of recycled
materials helps prevent
environmental pollution and
reduces the demand for raw
materials.
Local regulations may provide for
separate collection of electrical products
from the household, at municipal waste
sites or by the retailer when you
purchase a new product.
Black & Decker provides a facility for the
collection and recycling of Black & Decker
products once they have reached the end
of their working life. To take advantage of
this service please return your product to
any authorised repair agent who will
collect them on our behalf.
You can check the location of your
nearest authorised repair agent by
contacting your local Black & Decker
office at the address indicated in this
manual. Alternatively, a list of authorised
Black & Decker repair agents and full
details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com
Battery (fig. H)
Z
When disposing of the product,
the battery must be removed
as described below and
disposed of in accordance with
local regulations.
If you want to dispose of the product
yourself, the battery must be removed as
described below and disposed of in
accordance with local regulations.