Frigidaire FGDS3065PF_UC Use & Care Manual page 10

BEFORE SETTING SURFACE BURNERS
Double Ring style burners (some models)
The Double Ring burner only operates properly with two
burner caps in place. Be sure the burner cap lips are posi-
tioned facing down towards the burner head and into the
recessed areas (Figure
Be sure both burner caps are seated firmly and rest level on
the burner head before operating.
Check the fit for each cap using the same method for the
round burner caps by gently sliding each cap from side to
side. Please note that the burner cap lips should not move
out of recessed areas of the burner head.
Dual burner head (some models)
Burner cap
Recessed areas
Figure 5: Dual burner head using two burner caps
10
5) on each side of the burner head.
Burner cap lip
Burner head
Burner caps
Burner
head
IMPORTANT
Please note that the burner cap should not move off the
center of the burner head when sliding from side to side.
• Check and be sure that all oval style (some models)
burner caps are correctly in place on oval burner
heads.
• Do not use the surface burners without the burner
caps and burner grates properly installed.
• Missing pieces or improper installation may lead to
spills, burns, or damage to your range and cookware.
• Make sure the burner grates are properly placed on
the cooktop before using the surface burners
(Figure 6). The grates are designed to rest inside the
recess on the cooktop.
• To install burner grates, place grates flat-side down
and align into the cooktop recess.
• Grates should rest flush against each other and
against the sides of the recess.
Figure 6: Proper grate installation