6 Other features
Project time onto a surface
By projecting time onto a surface such as a wall,
this clock radio offers you a unique way to read
time in the dark.
1
Press PROJECTION to turn the projection
on.
» The projection lens lights up.
2
Rotate the ROTATE PROJECTION
knob to find a suitable projection surface
(maximum 100-degree left or 100-degree
right).
10
EN
PROJECTION
ON/OFF
3
Scroll the wheel on the ROTATE
PROJECTION knob to adjust the
projected angle slightly (maximum
60-degree left or 60-degree right).
4
Press REVERSE PROJECTION to reverse
the projected time (if necessary).
REVERSE
PROJECTION
5
Press PROJECTION again to turn the
projection off.
» The projection lens lights off.
Note
•
In battery-powered mode, the projection only lights
up for 10 seconds after you press PROJECTION. You
cannot use the projection function when the battery
level is low.
•
For a long-time projection, use AC power to operate.
•
During time or alarm setting, the projection is turned
off to protect eyes.
•
It is highly recommended to view the projected time in
low light environment.