Table of Contents
Advertisement
14184661-HD, ED. 1.fm Page 8 Friday, February 26, 2010 8:38 AM
Auto Connect
Menu
1 Press
2 Scroll to
3 Scroll to
4 Scroll to
5 Scroll to
6 Activate
Select
, then press
headset will now connect
automatically to the handset when
the headset is turned on.
Headset Volume
1 Press
Menu
2 Scroll to
3 Scroll to
4 Scroll to
5 Scroll to
6 Scroll to
Select
.
7 Press left or right side of navigation
key to adjust the volume.
Switch Between Headset and
Handset
When the headset is active and the hand-
set is off hook,the audio can be switched
between the headset and the handset.
1 Activate handset / headset soft key by
pressing the left or the right side of
the navigation key.
2 Press
Handset
switched to the handset.
Headset
3 Press
switched back to the headset.
Battery
The battery is connected to the handset
from factory and must not be removed.
To replace the battery, please contact your
local distributor.
to enter main menu.
Settings
and press
Bluetooth
and press
Active
and press
Settings
and press
Auto connect
Back
to enter main menu.
Settings
and press
Bluetooth
and press
Active
and press
Settings
and press
Headset
volume and press
, and the audio is
, and the audio is
8
Select
.
Select
.
Select
.
Select
.
by pressing
. The wireless
Select
.
Select
.
Select
.
Select
.
Advertisement
Table of Contents
Need help?
Do you have a question about the KYRK 7010 and is the answer not in the manual?
Questions and answers