Download Print this page

Advertisement

3. PC Connection

System Requirements.
The PC system must meet the following specifications:
Pentium 200MHz or greater
40MB of available hard disk space
USB port (2.0) supported
I
Connecting the player to PC with the USB cable
1
Connect the USB cable to the USB port on the computer.
If you disconnect the USB cable from your PC while implementing a command or
initializing during USB driver installation, your PC may not function correctly.
2
Connect the other end of the USB cable to the USB cable connection port on the
bottom of the player.
If you disconnect the USB cable from your PC while implementing a command or
initializing during USB driver installation, your PC may not function correctly.
3
The USB driver is installed with a message saying that it is searching for a new
device. You may not see the display screen during installation.
Go to the device manager to check that installation has been successfully
completed.
4
Upon installation of the USB driver "Samsung YP-T55 USB Device" will appear
in the [System Properties]
Ho
w to c
hec
k if USB driver is pr
Ho
w to c
hec
k if USB driver is pr
Windows 98:
Control Panel
System
Device Manager
Windows 2000:
Control Panel
System
Hardware
Samsung YP-T55 USB Device
Windows XP:
Control Panel
System
Hardware
Disk Drives
Samsung YP-T55 USB Device
5
When the USB driver is not installed automatically, refer to the next page.
Samsung Electronics
Windows 98 SE/ME/2000/XP
CD-ROM drive (double speed or greater)
DirectX 8.0 or above
[Device Manager].
operl
y installed
operl
y installed
Disk Drives
Samsung YP-T55
Device Manager
Disk Drives
Device Manager
Universal Serial Bus controllers
3-5

Advertisement

   Also See for Samsung YP-T55

   Related Manuals for Samsung YP-T55

Comments to this Manuals

Symbols: 0
Latest comments: