Channels; Install Channels; Channel Lists - Philips 7101 series User Manual

8

Channels

8.1

Install Channels

For more information, in Help, select Keywords and
look up Channel, Satellite Installation.
8.2

Channel Lists

About Channel Lists
After a channel installation, all channels appear on
the channel list. Channels are shown with their name
and logo if this information is available.
For each type of tuner - Antenna/Cable (DVB-T/C) or
Satellite (DVB-S) - there is a channel list with all
installed channels. You can only filter this list to show
TV or only Radio channels. Or when you have several
satellites installed, you can filter the channels per
satellite.
With a channel list selected, press the
arrows  (up) or  (down) to select a channel,
then press OK to watch the selected channel. You
only tune to the channels in that list when
using   or   keys.
Channel icons
After an Automatic Channel Update of the channel
list, newly found channels are marked with
a  (star).
If you lock a channel, it will be marked with
a  (lock).
The 3 most popular channels being watched by
others at this moment are marked with a 1, 2 or 3.
Radio stations
If digital broadcasting is available, digital radio
stations are installed during installation. Switch to a
radio channel just like you switch to a TV channel. A
Cable (DVB-C) channel installation usually places
radio stations from channel number 1001 onwards.
This TV can receive digital television standard DVB .
TV may not work properly with some operators of
digital television , non-compliance with requirements
of the standard in full.
Open a Channel List
Next to the list with all channels for each tuner,
Antenna/Cable or Satellite tuner, you can select a
filtered list or you can select one of the favourite lists
you created.
To open the current channel list...
1 - Press  , to switch to TV.
2 - Press OK to open the current channel list.
3 - Press  BACK to close the channel list.
To select one of the channel lists...
1 - With a channel list open on screen.
2 - Select the list name at the top of the channel list
and press OK to open the list menu.
3 - In the list menu, select one of the available
channel lists and press OK.
Tip
You can easily switch between the two tuners in
the Sources menu.
Press  SOURCES and select Watch TV to switch
to the Antenna/Cable tuner. Select Watch
Satellite to switch to the satellite tuner.
The TV will always open the last selected channel list
for the selected tuner.
Filter a Channel List
You can filter a list with all channels. You can set the
channel list to show only TV channels or only Radio
stations. For Antenna/Cable channels you can set the
list to show the Free-to-Air or the Scrambled
channels. When you have several satellites installed,
you can filter the satellite channel list per satellite.
To set a filter on a list with all channels...
1 - Press  .
2 - Press OK to open the current channel list.
3 - With a channel list open on screen, select the list
name at the top of the channel list and press OK to
open the list menu.
4 - In the list menu, select the list you want to filter.
5 - In the Options menu, select the filter you want
and press OK to activate. The name of the filter
appears as part of the channel list name on top of the
channel list.
6 - Press  (left) to go back one step or
press  to close the menu.
34