Installing The Monitor; Assembling The Stand - LG 34UM94 Owner's Manual

Installing the Monitor

assembling the stand

1
Place the screen face down.
stand Hinge
CaUTIon
To protect the screen from scratches, cover
y
the surface with a soft cloth.
2
Mount the stand base onto the stand hinge
as shown in the illustration. Fix two screws
into the back of the stand base and close the
screw cover.
stand base
120 mm
asseMblInG anD PRePaRInG
or
screw Cover
CaUTIon
The stand height is adjustable by 20 mm
y
When tightening the screws after mounting
y
the stand base onto the stand hinge, be sure
to hold the stand base with your hand. Other-
wise, the product may fall, causing personal
injury or damage to the product.
Be careful not to hurt your hand on the edges
y
of the screw covers.
Applying excessive force when tightening
y
screws may cause damage to the monitor.
Damage caused in this way will not be cov-
ered by the product warranty.
If you use the monitor panel without the
y
stand base, its joystick button may cause the
monitor to become unstable and fall, result-
ing in damage to the monitor or human injury.
In addition, this may cause the joystick button
to malfunction.
9
100 mm