Hardware Installation; Mounting To A Ceiling Or A Wall - D-Link DCS-6112 Quick Installation Manual

Fixed dome network camera

Hide thumbs Also See for DCS-6112:

Table of Contents

Available languages

3. Hardware Installation

1. Locate an area on the ceiling or wall which is capable of supporting the weight of the

camera.

2. Attach the alignment sticker to the ceiling or wall.

3. Drill two pilot holes where the holes of the alignment sticker are located.

4. Insert the supplied plastic anchors into the drilled holes, and align the holes at the

base of the camera with the plastic anchors.

5. The camera can be mounted with the cable routed through the ceiling, wall, or from

the side.

6. Insert the provided screws through the holes. Use a screwdriver to tighten and

secure.

D-Link DCS-6112/DCS-6113/DCS-6113V Quick Install Guide

Table of Contents

Dcs-6113 Dcs-6113v